User Manual

Operators Guide
16
Pan and tilt fluid drag
Both the pan and tilt mechanisms incorporate the OConnor ultra smooth fluid drag system to
ensure smooth movement. Control knobs on the right side of the head are used to adjust the
drag settings over the range of 0 to 9. The pan drag knob is the smaller one at the base of the
head. The larger tilt drag knob is in the center on the tilt drag housing. To increase drag, turn the
knob clockwise, towards a higher setting. To decrease drag, turn the knob counter-clockwise,
towards a lower setting.
Balance display
The balance display is enabled by the display actuator button. It remains active for
approximately 15 seconds after adjustment of the counterbalance crank has finished.
Low battery
The balance display will flash when the battery requires replacement (see "Battery
Replacement" in the Servicing section).