O-Focus DM Photo Set O-Focus DM Cine Set C1242-0001 C1242-0002 e User Guid User Guide
! Caution Ÿ DO NOT hang heavy items over the O-Focus DM handwheel. Ÿ DO NOT attempt to move the camera by pulling on the O-Focus DM handwheel. Ÿ AVOID overtightening the drive gear onto the lens focus drive. Ÿ ALWAYS use genuine OConnor parts and accessories with the O-Focus DM. Ÿ ALWAYS dismantle when not in use and before transporting. Ÿ Never use solvents to clean the O-Focus DM. Wipe clean with a damp cloth. Copyright © 2011 The Vitec Group plc All rights reserved throughout the world.
Contents Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The O-Focus Dual Mini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 O-Focus DM Photo Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 In the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The O-Focus DM Cine 4
Congratulations on the purchase of your new OConnor O-Focus DM! We want you to get the most from your new O-Focus Dual Mini, and therefore encourage you to read this user guide to familiarize yourself with its many features, some of which may be new to you. It also covers essential information about safety and product care.
Specification O-Focus DM Photo Set (C1242-0001) Weight of unit (incl. LWS rod bridge, handwheel) . . . . . . . . . . . . . . . . . 1.23 lbs (0.56 kg) Weight of bridges (excl. handwheel). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.73 lbs (0.33 kg) Dimensions (excl. handwheel) . . . . . . . . . . . . . . . . . . . 7.2 x 2.2 x 1.5 in. (182 x 57 x 37 mm) Dimensions of hard-stop handwheel . . . . . . . . . . . . . . . . . . . . . Ø3.2 x 3.7 in. (Ø82 x 94 mm) Max.
In the box O-Focus DM Photo Set O-Focus DM Main bridge C1242-1300 C1242-0001 O-Focus Hard-Stop Handwheel C1242-1100 15 mm LWS rod bridge C1241-1540 Matching OConnor accessories: Gear Z60 C1241-1900 Gear Z35 C1241-1700 Gear Z43 C1241-1600 Studio rod bridge C1241-1100 (depending on lens) Handwheel (for double-sided use) C1241-1100 (Cine) C1242-1100 (Photo) Handwheel extension (70 mm) C1241-1500 Marking disc C1242-2421 (single, small) Gear Z50 C1241-1800 Marking Discs (conical, 10 pack) C1242-1530 Fr
Specification O-Focus DM Cine Set (C1242-0002) Weight of unit (incl. LWS rod bridge, handwheel) . . . . . . . . . . . . . . . . . 1.52 lbs (0.69 kg) Weight of bridges (excl. handwheel). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.73 lbs (0.33 kg) Dimensions (excl. handwheel) . . . . . . . . . . . . . . . . . . . 7.2 x 2.2 x 1.5 in. (182 x 57 x 37 mm) Dimensions of Cine handwheel. . . . . . . . . . . . . . . . . . . . . . . . . . Ø4 x 3.2 in. (Ø102 x 81 mm) Max.
In the box O-Focus DM Cine Set O-Focus DM Main bridge C1242-1300 CFF-1 Studio Handwheel (full-size offset knob) C1241-1100 C1242-0002 15 mm LWS rod bridge C1241-1540 Matching OConnor accessories: Gear Z60 C1241-1900 Gear Z35 C1241-1700 Studio rod bridge C1241-1300 (depending on lens) Gear Z43 C1241-1600 Handwheel (for double-sided use) C1241-1100 (Cine) C1242-1100 (Photo) Handwheel extension (70 mm) C1241-1500 “Glow-in-the-dark” marking disc C1241-2117 (single disc, large) C1241-1531 (10 pack, large
Components Part no. index eccentric CINE handwheel Gear size Lens type C1241-1700 35 tooth 0.8M 10 mm face Cine C1241-1600 43 tooth 0.8M 6 mm face Cine C1241-1800 50 tooth 0.6M 7.5 mm face Canon ENG focus C1241-1900 60 tooth 0.5M 7.
Components index screws O-Focus DM Photo C1242-0001 lock lever main bridge bridge interlock (with output gears) driver gear lock lever witness marker centric hard-stop handwheel hard-stop slider button LWS rod bridge lock lever (rod bridge) flip-lock rod clamp screw conical marking disc standard square socket for attachments 11
Assembly – assembling the bridge Double-sided design Front and back output gears Flip-lock rod clamp lever 1 Assemble the bridges. Slide the LWS rod bridge onto the main bridge. Turn the lock lever clockwise to secure the LWS bridge in position. The position of the main bridge can be adjusted using the sliding dovetail when mounting the O-Focus DM to the lens (see page 14). 12 2 Mount the driver gear. Choose a compatible driver gear for your lens (see page 10).
mounting the handwheel The O-Focus DM incorporates a Minimal Backlash Mechanism to guarantee precision focus pull with less play and higher accuracy. Note that the assembly instructions apply to both types of handwheel. 1 Push-fit the handwheel firmly onto the main bridge. The handwheel must be fully engaged for the backlashreducing mechanism to be effective. 2 Turn the lock lever clockwise to secure the handwheel on the main bridge.
mounting onto the camera rods Mounting the O-Focus DM to the lens requires the assembly to be adjusted in two steps: first assemble and mount the O-Focus on the camera rods, then adjust the main bridge, until the driver gear engages with the lens focus drive. For more information about the focal length and diameter of a wide range of camera lenses visit OConnor Labs online at the OConnor website (OConnor > Labs > ‘Lens Diameters’).
mounting the O-Focus to the lens Depending on the setup, the LWS rod bridge can also be replaced with a studio bridge to accommodate heavy-duty 15 mm or 19 mm studio camera rods (see page 10). For more information about different types of camera rods visit OConnor Labs online at the OConnor website (see OConnor > Labs > ‘Rod Standards Explained’). 3 Turn the lock lever clockwise to secure the main bridge in position. Ensure the bridge is firmly locked to avoid backlash.
setting the focal distances Set the lens focal range for the O-Focus DM Photo. Using a suitable pen mark the reference points for the maximum and minimum focal distances. Hard stops prevent lenses with infinite rotation from being turned too far. The hard stops can also be used as hard focus points for run and gun shooting. 2 Set the focal distances. Loosen the index, move the large witness marker to the end position, and tighten the screw.
setting the focal distances Set the focal distances for the O-Focus DM Cine. Using a suitable pen mark the lens focal reference points. The focus throw is optimized for cine lenses to provide a shorter, more exacting focus pull. focus pull 1 Mount the marking disc. Align the tongue on the handwheel with the cutout on the marking disc, then push the disc onto the handwheel until it audibly ‘clicks’ into place. 2 Set the initial lens focus and loosen the index to set it to the preferred eye level.
Options and extras For larger camera packages the O-Focus DM can also be used with an optional 70 mm handwheel extension (see page 7 for details). The eye level of the eccentric CFF-1 studio handwheel can be adapted for optimal ‘line of sight’ and for reach. Handwheel extension (70 mm) Note: Adjust the handwheel index up or down for your preferred eye level. The O-Focus DM has been optimized to work with still photography lenses used in cinema applications.
OConnor Offices worldwide ASIA EUROPE CHINA Room 706, Tower B Derun Building YongAn Dongli A No. 8 Jianwai Ave. Chaoyang District 100022 Beijing, China Tel.: +86 10 8528 8748 Fax: +86 10 8528 8749 FRANCE 171 Avenue des Grésillons 92635 Gennevilliers CEDEX France Tel.: +33 8 20 82 13 36 Fax: +33 8 25 82 61 81 HEADQUARTERS 2701 N. Ontario St. Burbank, CA 91504 USA Tel.: +1 818 847 8666 Fax: +1 818 847 1205 GERMANY Gebäude 16 Planiger Straße 34 55543 Bad Kreuznach Germany Tel.
O Connor ™ A V itec Group brand C1242-4980/1