Manualshelf

User Manual- C2560

ManualsBrandsOConnor ManualsProfessional VideoUltimate 2560 Fluid Head & 60L 150mm Bowl Tripod with Mid-Level Spreader
11121314151617181920
10
Mounting the Camera
The camera is attached to the head by means of a side loading platform
mechanism.
1. Release side loading platform if fitted.
2. Attach the mounting plate securely to the bottom of the camera in
the desired position.
3. Engage the tilt lock pin.
4. Release the safety catch and pull out the platform release lever.
5. Slide the camera mounting plate on to the platform towards the
right side of the head until an audible "click" is heard. When the
platform hook engages the camera mounting plate, the plate is
captive, but not locked.
6. Engage the base plate with the mounting plate. Slide the camera
and plate to the required position and lock by closing the platform
release lever.
WARNING! Before fitting or adjusting the camera or
payload the tilt lock pin must be engaged. See “Installation”
on page 9.