User Manual- C2560

Installation

Fore/Aft Balance

Ensure that the head is level before balancing. The camera and

payload should be fitted on the head, so that the load is

balanced. This can be achieved by moving the camera

forwards (Fore) or backwards (Aft) on the cradle.

WARNING! When balancing the payload, it is

important to be aware of the potential danger that an

unbalanced payload will fall away suddenly. Maintain a

firm hold on the payload until the balance is set

correctly.

CAUTION! The camera, handles and all accessories

must be fitted in their operational position before

balancing the head. Any equipment fitted or adjusted

later can unbalance the head.

WARNING! The payload balancing procedure requires

the assistance of another person.

Turn the counterbalance crank to set the

counterbalance to 50%.

Set the tilt fluid drag adjustment knob to 0.

Depending on the payload weight, it may be necessary to

increase or decrease this setting to enable the payload to

be correctly balanced fore and aft.

50%