Installation Manual

ASSEMBLY & INSTALLATION

OUR INSTALLATION PROCESS is simple, quick and tool-free

We’ve designed our theater seats so that they can be put together in a very short period of time, following 4 EASY steps:

f Step 1 : Unpack the seat bases and seat backs from the boxes.

f Step 2: Align the female receptor of the seat back on top of the male receptor of the seat base. Push down until you hear a click.

f Step 3: Place each seat next to each other in the desired configuration.

f Step 4: Plug each chair into a standard electrical outlet or surge protector. (Power recline seats only.)

Because each recliner weighs over 100 pounds, they will not move once placed in position. We offer seat connectors if placed on a wood or tile floor.

PAGE 1
We’ve designed our theater seats so that they can be put together in a very short period of time, following 4 EASY steps: ff Step 1 : Unpack the seat bases and seat backs from the boxes. ff Step 2: Align the female receptor of the seat back on top of the male receptor of the seat base. Push down until you hear a click. ff Step 3: Place each seat next to each other in the desired configuration. ff Step 4: Plug each chair into a standard electrical outlet or surge protector. (Power recline seats only.