User's Manual

3.6 Connection + Software Dependency

Note: To run Oculii’s software with the Eagle Mini the user will be required to purchase a

PCAN-USB CAN-FD interface (IPEH-002021). Oculii’s software has been developed with

Peak System’s drivers.

The drivers can be downloaded from the Peak Systems website. Link: https://www.peak-

system.com/PCAN-USB-FD.365.0.html?&L=1

For Multiple Sensor connection (up to 6 units) Oculii recommends purchasing a PCAN-USB

X6 Hub (IPEH-004062) that can be found here: https://www.peak-system.com/PCAN-USB-

X6.438.0.html?&L=1

However, the user can choose to just receive the radar output with their own application without

the use of PCAN-USB CAN-FD interface. For the same, please refer to the section 5 of this

manual for radar interface and decode. Note that this form of communication will not be

supported by Oculii’s softwares (OculiiWinView and SDK) and as such features like Firmware

update, data visualization, mounting input, switch mode will not be supported. To access the

same Oculii recommends using the above mentioned PCAN-USB CAN-FD interface.