User's Manual

6.3 Saved Results

Oculii saves the following results for the user.

i) Binary Point Cloud Data when the visualizer was running.

ii) Saved Point Cloud Video from the visualizer.

The data will be saved under C:\Oculii\Saved Results. A folder will be created with the date the

visualizer was run under the [YYYY-MM-DD] format followed by another folder under the [YYYY-

MM-DD-HH-MM-SS] format.

6.4 Binary to CSV file Converter

The binary file saved by the visualizer can be converted to CSV to read the data.

To run the Binary to CSV parser:

a. Copy the ‘OculiiParser_BinToCSV’ executable to the Sensor - Data folder where you will find a

file ending with _Pcl.bin.

b. Run the executable

Both the Point Cloud and Tracker CSV file will be generated from the saved binary.

7. FIRMWARE UPDATE ON VISUALIZER

The firmware and configuration files can be updated by following the below procedure.

1. The provided Update_Eagle_CANFD.bin file should be copied to the visualizer folder.

2. Connect the sensor to the PC

3. Run the Windows Visualizer.

4. Click on the Start Receive button.

5. Once the sensor is live and you start to receive data, click on the Install Update button.