Use and Care Manual

HAVE A HELPER SUPPORT THE GLASS
PAGE 4
C. LOOSEN
OUTER FRAME
Apply painter's tape to protect the
outside surface. INSERT THE PUTTY
KNIFE between the outer frame and
the door to break the old caulk seal.
B. REMOVE INNER FRAME
Once the screws are removed, have a helper stand on the outside
of the door and hold the frame. REMOVE THE INNER FRAME.
CAREFULLY PRY FRAME LOOSE
E. CLEAN & PREPARE
DOOR SURFACE
After the doorglass has been
safely removed, CAREFULLY
SCRAPE any old or excess caulk
and dirt from the inside and
outside openings.
While wearing safety glasses
and gloves, GENTLY REMOVE
THE EXISTING GLASS.
REPLACEMENT GLASS INSTALLATION INSTRUCTIONS
REMOVE EXCESS CAULK & DIRT
USE DRYWALL SCREW TO REMOVE SCREW HOLE PLUGS
INSIDE
TIP:
Spray window
cleaner around
outer frame's
edge to help
release caulk.
D. REMOVE
EXISTING DOORGLASS
B
C
E
A A
REMOVE EXISTING DOORGLASS
D
REMOVE FRAME
& GLASS
A. LOCATE SCREWS
AND REMOVE THEM
Old paint, putty, or caulk may need
to be removed from the screw plugs
first. REMOVE ALL SCREW PLUGS
AND ALL ATTACHMENT SCREWS.
2
WE RECOMMEND THAT THE 22"X 64" GLASS BE INSTALLED
WITH THE DOOR OFF THE HINGES AND LYING DOWN