Solar Powered Dimmer for Tubular Skylights Installation Instructions ������� �������� CALL US FIRST Do not return to the store! For assistance with your Solar Powered Dimmer installation, or for additional product information, call our toll-free customer service number: 1-866-635-4968, or visit us online at www.odl.com. Important Be sure to first read through and then follow completely all step-by-step instructions. This will help to insure proper installation and functionality.
What You Need To Know REVIEW THIS INFORMATION PRIOR TO BEGINNING INSTALLATION These instructions have been designed to help install your ODL® Solar Powered Dimmer easily and safely. We’ve included a parts list, list of tools required, installation instructions for a variety of ceiling types, handy tips, and safety precautions. Please read these instructions thoroughly before installing your ODL® Solar Powered Dimmer. Pay particular attention to the assembly diagrams, assembly order, and part names.
Limited Warranty for ODL Solar Powered Dimmer For Tubular Skylights Effective 08/08 Warranty Coverage 3. The Consumer must, if requested by ODL, permit ODL or its representative to inspect the Product. Subject to the conditions, exclusions and limitations herein, ODL Incorporated (“ODL”) warrants that its Tubular Skylight Dimmer Product (“Product”) is free from defects in material and workmanship that would render the Product unfit for its normal and recommended use.
Parts Identification TOOLS PARTS Standard Screwdriver Ladder Utility Knife Solar Powered Dimmer Needle Nose Pliers Safety Glasses Gloves Solar Panel Dimmer Remote Control AA Ni-MH Rechargeable Battery Pack (for Solar Powered Dimmer) Battery (for Remote Control) Roll of Foil Tape 3
1 Prepare The Components TOOLS These instructions outline the step-by-step process to install an ODL Solar Powered Dimmer. Before starting, review all instructions and become familiar with the parts shown on the previous page. Ladder Utility Knife SPECIAL NOTES • Always use safe procedures. • Wear safety glasses when working with tools. • It is helpful to have a second person assist during installation.
2 Prepare The Tubular Skylight TOOLS 1 Inside the attic, move any insulation away from the work area. 2 Carefully remove the foil tape that seals the top and bottom tubes. 3 Release the lock tabs that secure the bottom adjustable tube to the ceiling ring. You may have to use the tip of a standard screwdriver to release the lock tabs.
3 Install Solar Powered Dimmer TOOLS 1 Flat Screwdriver Position the Dimmer onto the Ceiling Trim Ring and snap it down onto the lock tabs. TIP Ladder Safety Glasses You may need another person to support the Ceiling Ring from below to protect the ceiling drywall from damage, or put hand through opening to support Trim Ring. Gloves 2 Insert the Solar Panel into its slot and connect its cable to the Dimmer. Be sure the Solar Panel’s “black box” is facing outward and toward the top.
4 Finishing the Installation NOTE TOOLS If you were previously unable to install the Solar Panel due to tight constraints of the Adjustable Tube, now would be the time to connect and install it by reaching through the Ceiling Ring. (See page 4, step 2 for reference) Flat Screwdriver Ladder Safety Glasses 1 In the room, re-install the Glass Diffuser Lens back into place. 2 Insert supplied battery into dimmer remote control. 3 Installation is complete.
5 Using The Solar Powered Dimmer NOTE Unit will function best if allowed to charge 1-2 days before first use. 1 1 Ensure unit is functional by cycling the shade closing and opening with the Remote Control. Shade can be started and stopped from any position. Shade opens if there’s light in tube and the nightlight is pressed on. 2 Turn LEDs on and off using Remote Control. NOTE LEDs will only operate if the Solar Panel is reading low light levels in the tube.
Lo que debe saber REVISE ESTA INFORMACIÓN ANTES DE COMENZAR CON LA INSTALACIÓN Español Estas instrucciones se redactaron para ayudarlo a instalar su atenuador de luz solar ODL® de una manera fácil y segura. Hemos incluido una lista de piezas, una lista de herramientas necesarias, instrucciones de instalación para diversos tipos de techos, consejos útiles y precauciones de seguridad. Lea estas instrucciones por completo antes de instalar su atenuador de luz solar ODL®.
Garantía limitada del atenuador de luz ODL para tragaluces tubulares Vigente desde el 08/08 Sujeta a condiciones, exclusiones y limitaciones incluidas en la presente guía, ODL Incorporated (“ODL”) garantiza que su atenuador de luz para tragaluces tubulares (“producto”) no tiene defectos en el material ni en la mano de obra, lo que haría que el producto no sea apto para su uso normal y recomendado. ESTA GARANTÍA SE APLICA Y SE EXTIENDE SOLO PARA EL CONSUMIDOR ORIGINAL QUE COMPRA ESTE PRODUCTO.
Identificación de las piezas Piezas: CONSEJO: Es posible que necesite la ayuda de otra persona para sostener el aro del techo desde abajo para que los paneles de yeso del techo estén protegidos y no se dañen, o introduzca una mano a través de la abertura para sostener el aro de borde.
Ce qu’il faut savoir Ces instructions ont été conçues pour aider à installer son Gradateur Solaire ODL® facilement et sans danger. Nous avons inclus une liste des pièces, une liste des outils requis, des instructions pour l’installation sur plusieurs types de plafond, des conseils pratiques et des précautions. Lire soigneusement ces instructions avant d’installer son Gradateur Solaire ODL®. Faire très attention aux diagrammes de montage, à l’ordre d’assemblage et au nom des pièces.
Garantie limitée pour le Gradateur de fenêtre de toit tubulaire ODL Mise en œuvre 08/08 Couverture offerte par la garantie 3. Le consommateur doit, sur demande d’ODL, permettre à ODL ou à son représentant d’inspecter le produit.
Outils: Tournevis standard Couteau utilitaire Lunettes de sécurité Échelle Pince à bec pointu Gants Ces instructions montrent le processus d’installation étape par étape d’un Gradateur Solaire ODL. Lire toutes les instructions et se familiariser avec les pièces montrées à la page précédente avant de commencer. 1 Préparer les composantes REMARQUES SPÉCIALES • Toujours utiliser des méthodes sans danger. • Porter des lunettes de protection quand on travaille avec des outils.
