User's Manual

【Quick Installation Guide─Infant Temperature Monitor v1.0】
2 07-2017 / v1.0
1.2.2 Icon Mode Description
1.2.2.1 Pairing Icon - Description
Pairing Icon：
(Table 2)
No Icon
(Device powering
on)
Pairing
Not Paired
Pairing Failed
1.2.2.2 Sound Level Icon - Description
Sound Level Icon：
(Table 3)
No Icon
(Device
powering on)
Mute
Soft
Medium
Loud
※ Note1：Setting the sound level is in regards to when the Alert is triggered.
※ Note2：To temporary set sound level to mute, simply press the ⦿ button
1.2.3 Temperature Range (To set off Alarm)
✦Body Temperature Threshold(℃ / ℉) Diagram: ✦Ambient Temperature Threshold(℃ / ℉) Diagram:
High-Temp.(H)Value Range Low-Temp.(L)Value Range High-Temp.(H)Value Range Low-Temp.(L)Value Range
(Table 4) (Table 5)
2. Sensor Pairing Instructions:
✦Quick Reminders (Infant Temperature Sensor):
(1) Hold down the Pairing Button for more than two seconds to enter pairing mode.
(2) Quickly press and release the Pairing Button to turn on the Red LED Indicator light for 10
seconds; this is useful for pointing the Thermal Image Receiver to the infant’s forehead.
2.1 Pairing Method
❶ First, please connect the power adapters to both the sensor and the receiver.
❷ Hold the ⦿ power button on the Receiver for five seconds and it will enter the main menu.
❸ Hold down the Sensor’s Pairing Button for two seconds, at the same time, hold down the Pairing
Button
○
M on on the Receiver for five seconds.
(Release the Sensor’s Pairing Button first, then the Receiver’s Pairing Button
○
M )
❹ Both devices will enter pairing mode; Indicated by the flashing Pairing Icon on the Receiver.
If the Pairing Icon turns steady , it means the pairing was successful. If pairing failed, please retry
from step ❷ .
2.2 Options Setting
✦Option Sequence(Using ⊕ button):
Cycle of Options: Sound Level ➜℃ / ℉ ➜Body(H)Temp.➜Body(L)Temp.➜Ambient(H)Temp.➜Ambient(L)Temp.
2.2.1 Sound Level Options (Mute/Soft/Medium/Loud)
❶ After pairing, the main menu will be displayed on the Receiver..
❷ To enter options, press the ⊕ button. The icon will start flashing, indicating this option is
ready for setting.
❸ Sound Level: By pressing the ⊝ Button, the sound level will cycle through
mute/soft/medium/loud settings; represented by the different flashing icons. (Pic.6)
❹ Press the ⊕ Button to confim the Sound Level, and it will automatically initiate the next Option.
(Table 6)
(Table 7)