Operation Manual

4.4 System settings

The last menu of the menu mode (SYS) allows you to change important system settings

for your MP3 player. It contains a total of 10 sub-items and Exit.

Switch the MP3 player on: Press the main switch to activate the MP3 player, if

you have not already done so.

Select the menu mode: Press and hold the

menu button for at least one second to switch to

the menu mode.

Selecting the system settings mode: Go to the SYS symbol. Press the menu

button to confirm the selection.

Selecting the setting: The system settings are

shown in a new sub-menu with symbols. Press

the menu button to navigate to the specific

system setting you wish to check or change.

Press the menu button to confirm.

Press and hold the menu button or the main switch to return to the menu mode. The

following menu settings are available and can be changed using the operating procedure

described above.

Record Time

This allows you to set the current data for the date and the

time. This data is required to mark voice recordings with

the date and time. Use the volume control buttons to select

the digits of the date and time and tilt the menu button to

change the time setting.

Backlight

This allows you to set whether the backlight is to remain on after a button is pressed and

how long it stays on (values between 0 and 30 seconds).

Backlight Mode (colour of the backlighting)

Select one of seven different colours for the backlighting.

Language

This menu item allows you to set the required language.

Power Off (automatic shutdown)

This menu allows you set one of two different shutdown modes. The off time display is

activated initially. Tilt the menu button to switch to the sleep time display. Press the menu

button and set the respective shutdown time.