Operation Manual

15
Installing Memory Card
- To use a memory card, find the card slot at the side of the
device and then insert the memory card into the slot in the
correct orientation or Connect USB Memory using the provided
USB adaptor cable. To access the files stored in the memory
card, enter the Explorer mode by tapping the Explorer icon and
select the “SD Card” directory.
- Push the Micro SD card into the card slot until it clicks. Check
that the Micro SD card is in the correct position with the contact
pin facing downwards as illustrated. You may damage the card
and the reader if Micro SD card is not inserted in correct
position.
- To remove Micro SD card, push the card once again until it
clicks.
Note: We recommend using only Micro SD or SDHC cards up to
32GB capacity.
- When a Micro SD card is inserted in or ejected from the device,
it may take few seconds for the
device to update the content.
- Please avoid inserting or ejecting Micro SD card when other
operation is running as this may cause
the system hang. Do Not remove the card if the content inside
the card is being played.
- Please use your fingernails to properly insert or remove the
card.