Operation Manual

47
DE
3.2 Inserting the batteries
Use two AAA (micro) batteries.
1
Push the cover of the battery
compartment in the direction
indicated to open the com-
partment.
2
Open the cover of the battery
compartment.
3
Insert the batteries into the
battery compartment and
ensure that the polarity is
correct. Close the cover of the
battery compartment by closing
it over and pushing it back into
place.
1. We recommend that you use rechargeable 1.2V NiMH
batteries as they have a longer battery life.
2. You can also use 1.5V alkaline batteries.
See the “Battery tips” section on page 38 for details on the battery life.
3.3 Inserting and removing the SD/MMC card
You can use SD or MMC cards to increase the memory capacity. Switch off the camera before inserting the card. Insert the card
as follows (photographs, sound and video recordings are no longer
stored in the internal memory, but stored on the card).
Inserting the card
1
Open the cover of the card slot.
2
Insert the card in the card slot
until it locks into place.
3
Close the cover of the card slot.
Removing the card
Open the cover of the card slot. Press the card downwards briefly to unlock it. Remove or change the card and close the card
slot cover again.