Operation Manual

53
DE
4.3.2 Snapshot
Press the On/Off button to switch the camera on.
1
Select single
shot mode
When the camera is
switched on, it is automa-
tically in still photograph
mode. If this is not the
case, press the
mode button to select the
photography mode. Photo-
graphy mode is active
when the
symbol
appears in the upper
corner of the LCD display.
2
Zooming in or out digitally
Use the LCD to frame the image and press the up button to
zoom in or the down button to zoom out.
3
LCD
You can now view the image
on the LCD. The meaning of
the status symbols shown on
the LCD is explained in the
table on page 11.
4
Taking a photograph
Press the shutter release down fully to take a photgraph.
A sound signals that the photograph has been taken.
Photographs taken with the camera are saved as JPEG files.
When you press the menu button in photography mode, the following menu functions are available for selection:
• Capture Mode
• Strobe
• Resolution
• Photo Quality
• Photo Effect
• WB
• EV
You can choose between three different image modes in the “Capture Mode” menu function:
Single When the shutter release is pressed, a
single photograph is taken.
Sequence When the shutter release is pressed, a
series of three photographs is taken.
SelfTimer The photograph is taken 10 seconds after
the release is pressed.
The photography mode is preset to single-shot.
The LCD can be switched off using the sleep button
(LCD on/off) to save power.
Photo/configuration
mode button