Specifications

14
EN
9 Using USB memory
1. Connect the device to the power supply and connect a memory device
2. Switch the device on
3. Or press Stop to stop a current playback.
4. Press the SOURCE key at the remote control.
5. Use the /-keys to select USB and confirm by pressing OK.
6. Select the File you would like to play:
Prior to connecting the device, make sure that the USB memory stick contains supported files.
Note
If possible, please connect USB devices directly to the devices USB interface.
If this is not possible, use only USB extension cables not exceeding 25 cm.
Please only use USB memory sticks up to 8GB capacity
10 Playback operation
10.1 Getting started
1
Connect the device to a mains socket.
2
Push the POWER ON/OFF switch on the top of the device to the ON position.
3
Open the DVD tray by pushing the OPEN/CLOSE key.
4
Place the CD or DVD with the printing to upwards at the tray, then close the tray.
5
Adjust the volume to the desired level using the Vol+ / Vol- keys.
Operating the device and general buttons
Depending on the situation, you can use the buttons on the device or remote control to
operate the device. However, the remote control enables greater usage of the device
functions.