Operation Manual

15
Installing Memory Card
- To use a memory card, find the card slot at
the side of the device and then insert the
memory card into the slot in the correct
orientation as shown. Check that the Micro
SD card is in the correct position with the
contact pin facing downwards directed to
the screen as illustrated. You may damage the card and the
reader if Micro SD card is not inserted in correct position.
- Push the Micro SD card into the card slot until it clicks.
- To access the files stored in the memory card, enter the Explorer
mode by tapping the Explorer icon and select the “SD Card”
directory.
- To remove Micro SD card, push the card once again until it clicks.
Note: We recommend using only Micro SD or SDHC cards up to
64GB capacity.
- When a Micro SD card is inserted in or ejected from the device, it
may take few seconds for the
device to update the content.
- Please avoid inserting or ejecting Micro SD card when other
operation is running as this may cause
the system hang.
- Do Not remove the card if the content inside the card is being
played. This will halt the
operation of the device and might cause a system hang.
- Please use your fingernails to properly insert or remove the card.
Rückseite