Operation Manual

16
Installing Memory Card
- To use a memory card, find the card slot at the side of the
device and then insert the memory card into the slot in the
correct.
- Push the Micro SD Card card gently and completely into the
card slot.
Check that the Micro SD card is in the correct position with the
contact pin facing downwards as illustrated. You may damage
the card and the reader if Micro SD card is not inserted in
correct position.
- To access the files stored in the memory card, enter the
Explorer mode by tapping the Explorer icon and select the “SD
Card” directory.
Note: We recommend using only Micro SD or SDHC cards up to
32GB capacity.
- When a Micro SD card is inserted in or ejected from the device,
it may take few seconds for the
device to update the content.
- Please avoid inserting or ejecting Micro SD card when other
operation is running as this may cause
the system hang. Do Not remove the card if the content inside
the card is being played.
- Please use your fingernails to properly insert or remove the
card.
Installing SIM card
To use a SIM card, find the card slot at the backside of the device
and then insert the SIM card into the slot in the correct orientation
- Check that the SIM card is in the correct position with the
contact pin facing downwards directed to the screen as
illustrated. You may damage the card and the reader if SIM card
is not inserted in correct position.
- Push the SIM card gently and completely into the card slot.
Note: The SIM Card can only be recognized if the device was
turned off while inserting.
Nano SIM Cards are not supported.