Troubleshooting Guide

12
The main radio interface, as shown below
：
[Note] The introduction is for reference only, please refer to the actual product.
band，as：FM1、FM2、FM3、AM1、AM2
Short press the button from the system will search the radio station step by step
from high frequency to low frequency or from low frequency to high frequency until you
find the radio frequency you want (FM band short press for FM1 \ FM2 \ FM3 band
between the 1-6 units switch; long press
to automatically scan the radio to the high
frequency; long press
to the low-end scanning stationNote: If there is a tuner on some
models of the front panel button, rotate it to the search frequency).
The stronger the FM signal, the switch of the stereo, the radio broadcast effect is
good, whereas in the remote area, the wireless signal is not stable, close the stereo switch
to single channel, can improve the effect of the radio.
When in a remote area, the radio signal is unstable, usually switching to the
remote mode, the closer to the city center, the more powerful the FM broadcast signal,
usually switching to the short range to improve the effect of the radio broadcast.
Automatically browse stations and store up to six preset stations per band. The
system can store up to 30 preset stations (18 FM stations and 12 AM stations). (Click the
browse button to browse the stations that have been memorized in the band (view a
station every 5 seconds). After browsing to the appropriate station, click Browse and the
selected station will play.
Click on the button s ystem will automatically search the radio from low to high
frequency, during the search process, once again hit the button will stop the search, while
the frequency of the screen will stop changing.
Can enter the sound settings to switch the sound.
7、Multimedia music