Use and Care Manual

4
Operating Instructions and Parts Manual 24389
10/18
2018 OEMTOOLS
™
MANUAL
FLUID EXTRACTOR
5. Connect the main suction tube to the dipstick tube.
6. Insert the O-Ringed plug of the main suction tube into the reservoir
adapter and then insert the adapter into the top of the reservoir.
Ensure the tube connections are tight to prevent leakage.
7. Extract the used transmission fluid by pumping the evacuator
handle several times to create a vacuum. Once the fluid begins to
flow into the reservoir, continue to operate the pump until all the
fluid has been drained from the transmission pan.
8. Remove the main suction hose from the reservoir adapter; pour the
used transmission fluid from the reservoir into a suitable container,
then dispose of the fluid in an appropriate manner.
EXTRACTING MOTOR OIL THROUGH
THE DIPSTICK TUBE
WARNING: Never remove the cap from the radiator or expansion
tank while the engine is at operating temperature. Always allow the
engine to cool before removing the radiator cap or expansion tank cap.
The cooling system is under pressure. Failure to allow the engine to cool
before attempting to remove the cap could result in serious injuries.
1. Properly park the vehicle on level ground and turn the engine off.
2. Allow engine to cool completely. Caution: DO NOT attempt to extract
fluids at temperatures greater than 175° Fahrenheit (80° Celsius).
3. Remove the radiator or expansion tank cap.
4. Insert the suction tube into the radiator or expansion tank until it
reaches the bottom.
5. Insert the O-Ringed adapter into the pour spout on the top of the
reservoir. Ensure the tube connections are tight to prevent leak.
6. Extract the used coolant by pumping the evacuator handle several
times to create a vacuum. Once the coolant begins to flow into the
reservoir, continue to operate the pump until all the coolant has
been drained from the radiator or expansion tank.
7. Remove the reservoir adapter from the reservoir; pour the used
coolant from the reservoir into a suitable container, then dispose of
the coolant in an appropriate manner.
EXTRACTING BRAKE FLUID FROM
THE MASTER CYLINDER
1. Properly park the vehicle on level ground and turn the engine off.
2. Clean the exterior of the master cylinder and master cylinder cap to
prevent dirt from entering the master cylinder when the cap is removed.
3. Remove the cap from the master cylinder reservoir.
4. Insert the suction tube into the master cylinder reservoir.
5. Insert the O-Ringed adapter into the pour spout on the top of the
reservoir. Ensure the tube connections are tight to prevent leak.
6. Extract the used brake fluid by pumping the evacuator handle
several times to create a vacuum. Once the fluid begins to flow into
the reservoir, continue to operate the pump until all the fluid has
been drained from the master cylinder.
7. Remove the reservoir adapter from the reservoir; pour the used
brake fluid from the reservoir into a suitable container, then dispose
of the fluid in an appropriate manner.
EXTRACTING POWER STEERING FLUID FROM
THE POWER STEERING FLUID RESERVOIR
1. Properly park the vehicle on level ground and turn the engine off.
2. Clean the exterior of the power steering fluid reservoir to prevent
dirt from entering the reservoir when the cap is removed.
3. Remove the cap from the power steering fluid reservoir.
4. Insert the suction tube into the master cylinder reservoir.
5. Insert the O-Ringed adapter into the pour spout on the top of the
reservoir. Ensure the tube connections are tight to prevent leak.
6. Extract the used power steering fluid by pumping the evacuator
handle several times to create a vacuum. Once the fluid begins to
flow into the reservoir, continue to operate the pump until all the
fluid has been drained from the power steering fluid reservoir.
7. Remove the reservoir adapter from the evacuator reservoir; pour
the used power steering fluid from the reservoir into a suitable
container, then dispose of the fluid in an appropriate manner.
MAINTENANCE
1. Always store the Manual Fluid Extractor in a well-protected area
where it will not be exposed to inclement weather, corrosive
vapors, abrasive dust, or any other harmful elements.
2. Keep the Manual Fluid Extractor clean for better and safer
performance.
3. Inspect Reservoir, Hoses, Caps, Gaskets, Seals, Gauge and Adapters
periodically; if damaged, replace them.
4. Rinse the Evacuator Reservoir, Pump, Adapter, and Tubes with clean
solvent or engine degreaser, and allow them to dry thoroughly.
OEMTOOLS™ LIMITED LIFETIME WARRANTY
For as long as you own this OEMTOOLS™ product, if you find any defect in material or workmanship, through normal usage, return it to the place of purchase or to
OEMTOOLS™ for repair or replacement at our discretion. In order to obtain this service, send your tool and proof of purchase (transportation pre-paid) to:
OEMTOOLS™ Q.A. Dept., 3580 E. Raines Road #3, Memphis, TN 38118.
We will not be responsible for lost or damaged goods during transportation; please insure your package. If our inspection verifies the defect, we will repair or replace the
product, or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense,
but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
OEMTOOLS™ does not provide warranty for products labeled other than OEM
®
or OEMTOOLS™. OEMTOOLS™ will not provide any warranty for products subjected
to abnormal use. Abnormal use includes (but is not limited to) abuse, accident, alteration, neglect, and unauthorized or unreasonable use or repairs. This warranty does
not cover bits, blades, files, batteries, or calibration. We recommend that you maintain your tools and sharpen or replace blades, bits, files, and batteries as necessary.
OEMTOOLS™ reserves the right to make any changes in construction or design at any time without any obligation in incorporating such changes to tools or equipment
previously sold.
OEMTOOLS™ makes every effort to ensure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free
from defects in materials and workmanship for the period of one year from the date of purchase. This warranty does not apply to damage due directly or indirectly to
misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY
IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. This warranty gives you
specific legal rights, and you may also have other rights, which vary from state to state.
Don’t forget to register your new OEMTOOLS™ product at www.oem-tools.com.