User Manual

2
Operating Instructions and Parts Manual 24993/24994/24995/24996/24997/24998/24999
7/18
2018 OEMTOOLS
™
WORKSHOP
CREEPER SEAT
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your product. Read this manual carefully. Learn
the product’s applications and limitations, as well as
potential hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark
work areas invite accidents.
3. Keep children away. All children should be kept
away from the work area. Never let a child handle
this product.
4. DO NOT operate this product if under the influence of
alcohol or drugs. Read warning labels on prescriptions
to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, DO NOT
attempt to operate.
5. Use safety equipment. Eye protection should be worn at
all times when operating this product. Use ANSI approved
safety glasses. Everyday eyeglasses are NOT safety glasses.
Dust mask, non-skid safety shoes, hard hat or hearing
protection should be used in appropriate conditions.
6. Wear proper apparel. Loose clothing, gloves, neck-ties,
rings, bracelets or other jewelry may present a potential
hazard when operating this product. Keep all apparel
clear of the product.
7. DO NOT overreach. Keep proper footing and balance
at all times when operating this product.
8. Check for damage. Check your product regularly. If
part of the product is damaged, it should be carefully
inspected to make sure that it can perform its intended
function correctly. If in doubt, the part should be
repaired. Refer all servicing to a qualified technician.
Consult your dealer for advice.
9. Keep away from flammables. DO NOT attempt to
operate this product near flammable materials or
combustibles. Failure to comply may cause serious
injury or death.
10. Store idle product out of the reach of children and
untrained persons. This product may be dangerous in
the hands of untrained users.
11. Maintain product with care.
12. Keep product dry and clean.
13. DO NOT use a damaged product. Tag damaged
products “DO NOT USE” until repaired.
14. Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the product’s operation.
15. Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one product may become hazardous when
used on another product.
16. If damaged, have the product serviced before
using. Many accidents are caused by poorly
maintained products.
17. Product service must be performed only by qualified
repair personnel. Service or maintenance performed by
unqualified personnel could result in a risk of injury.
18. When servicing a product, use only identical replacement
parts. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of injury.
19. Maintain a safe working environment. Keep the work
area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions,
grease, oil, trash, and other debris. DO NOT use this
product in a damp or wet location.
20. Maintain labels and nameplates on this product. These
carry important information. If unreadable or missing,
contact OEMTOOLS
™
for a replacement.
21. Avoid accidental fire and/or explosion. DO NOT smoke
near engine fuel and battery components.
22. We believe the information contained herein to be
reliable. However, general technical information is given
by us without charge and the user shall employ such
information at their own discretion and risk. We assume
no responsibility for results or damages incurred from
the use of such information in whole or in part. Always
refer to specific instructions and technical information
supplied by the vehicle manufacturer.
SPECIFIC SAFETY INSTRUCTIONS
AND WARNINGS
23. The OEMTOOLS
™
Workshop Creeper Seat is
specifically designed to be used as a mobile workshop/
garage/shed seat ONLY and is not designed for any
other purpose. Using the Workshop Creeper Seat for
any other purpose could be dangerous and could
cause serious injury/death to yourself and others.
24. NEVER stand on, lie on or operate the Workshop
Creeper seat at any speed, on rough/exposed
uneven surfaces.
25. DO NOT stand on this product. You may fall, which
may lead to personal injury.
26. DO NOT let children near the Workshop Creeper
Seat. DO NOT allow children to play on, stand
upon or climb on seat.
27. Always distribute objects in/on the Workshop Creeper
Seat evenly. Uneven weight distribution may cause the
seat to tip over.
28. DO NOT step or lean on the drawers.
29. DO NOT alter this product in any way. Any added
material or components may imbalance the
product, which may lead to property damage and
personal injury.
30. Be mindful of sharp edges/welds while assembling and
operating this product. Always wear safety gloves and
appropriate safety equipment while working with tools
and equipment.
31. DO NOT exceed weight capacity (see product
specifications). This may lead to product failure and
personal injury.
32. Keep this product on a flat, level surface. Failure to do
so may cause the product to tip and lead to property
damage and personal injury. It is easy to lose control of
the Workshop Creeper Seat if attempting to pull a load
on an uneven or sloped surface.
33. Beware of imperfections and cracks on the work floor.
34. Should the equipment be used in a manner not
specified, the protection provided by the equipment
may be impaired and the warranty voided.