3000LBS /3500LBS/4000LBS/4500LBS/5000LBS INSTRUVTION ATV-3000-4500lbs-S 未命名-1 未命名-1 未命名-7 3000-4500lbs-S型-新.indd INSTRUVTION ATV-S型.
未命名-1 未命名-1 22 未命名-7 3000-4500lbs-S型-新.indd INSTRUVTION ATV-S型.
图.pdf 1 2018/12/27 at 星期四 17:09:02 technical services ---. 1 1 2 2 2 1 3 3 3 4 4 5 5 4 7 7 5 7 C M Y CM 11 11 6 6 12 12 11 12 MY 13 13 CY 9 9 6 9 13 CMY K 16 10 10 10 14 1414 15 16 16 15 15 (8) Galvanized steel aircraft cable or synthetic rope desteel aircraft cable or synthetic rope de(8) Galvanized signed specifically for winch load capacities. signed specifically for winch load capacities.
p4.pdf 1 2018/12/27 星期四 17:20:40 C M Y CM MY CY CMY K 未命名-1 未命名-1 44 未命名-7 INSTRUVTION 3000-4500lbs-S型-新.indd ATV-S型.
• Install the rocker switch to the handlebar using the hardware included in this kit as shown below. • It is recommended that the switch be installed on the left handlebar. Exact position may vary depending on vehicle. • Use a piece of electrical tape (not provided) around the handlebar to help prevent rotation of the switch bracket mount. • Tighten the rocker switch in place. DO NOT overtighten or tighten/clamp over any hose, wiring or cables.
• Acckrding drawing to cinnect the receiver of wireless switch to connect with contactor /solenoid. • The antenna Red Black Black Blue The remote control Red White Yellow Black 接线图 Red Red Black Blue make sure to splice into keyed accessory wire that has power when key is turned on. You may make to splice into keyed accessory need to use a sure test light to locate a suitable wire.
Attach to positive (+) battery terminal Attach to yellow terminals Attach to negative (-) battery terminal 未命名-1 未命名-1 77 未命名-7 3000-4500lbs-S型-新.indd INSTRUVTION ATV-S型.
Before you begin using your winch, read and understand the guide. Please retain this guide for future reference. These safety warnings and instructions apply if you choose to add an accessory winch to your vehicle. follow all winch instructions and warnings in this manual. Improper winch use can result in SEVERE INJURY or DEATH. Your winch may have a cable made of either wire rope or specially designed synthetic rope.
16. Never touch, push, pull or straddle the winch cable while winching a load. 17. Never let the winch cable run through your hands, even if wearing heavy gloves. 18. Never release the clutch on the winch when the winch cable is under load. 19. Never use the winch for lifting or transporting people. 20. Never use the winch to hoist or suspend a vertical load. 21. Never immerse or submerse your winch in water. Take your winch to your dealer for service if this occurs. 22.
Read the in the preceding pages before using your winch. Consider practicing the operation and use or your winch before you actually need to use it in the field. follow all winch instructions and warnings in this manual. Improper winch use can result in SEVERE INJURY or DEATH. Each winching situation is unique: • Take your time to think through the winching you are about to do. • Proceed slowly and deliberately.
B. Never hook the winch cable back onto itself. This will damage the winch cable and may result in winch cable failure. C. replace the winch cable at the first signof D. damage to prevent SEVERE INJURY or DEATH in the event of a failure. For your safety, always replace winch parts (including the cable) with replacement parts available at your authorized dealer or the website.
12. Never attempt to winch another stuck vehicle by attaching the winch cable to a suspension component, brush guard, bumper or cargo rack. Vehicle damage may result. Instead, attach the winch to a strong portion of the vehicle frame or hitch. 13. Extensive winching will run down the battery on the winching vehicle. Let the winching vehicle’s engine run while operating the winch to prevent the battery from running low if winching for long periods. 14.
shock load a winch cable. Your winch cable is very strong but it is NOT designed for dynamic, or “shock” loading. Shock loading may tension a winch cable beyond its strength and cause the cable to break. The end of a broken winch cable under such high loading can cause SEVERE INJURY or DEATH to you and other bystanders. 1.
follow all winch instructions andwarnings in this manual. Improper or lack of winch maintenance and service could lead to SEVERE INJURY or DEATH. 1. Always inspect your winch before each use. Inspect for worn or kinked winch cable. Also inspect for worn or loose parts including mounting hardware. 2. Permit your winch motor to cool down prior to servicing your winch. 3.
• Motor: 12V DC, permanent magnet type, heavy duty • • • • 1.2 HP ………………………………………..….……. 3000 lb. rated pull 1.2 HP ………………………………………………… 3500 lb. rated pull 1.3 HP ………………………………………………… 4000 lb. rated pull 1.4 HP ………………………………………………… 4500 lb. rated pull • • Motor duty cycle: Intermittent Motor: DC,reduction permanent magnet type, heavy duty • 12V Gear ratio ……………………………………….…… 166 : 1 •• •• •• • Brake: Mechanical 1.2 HP ………………………………………..….…….
3000LBS/3500LBS/4000LBS/4500LBS Diagrams and part number TX4500 Winch Parts List Assembly Drawing material no. quantity 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 4 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 material no.
S型爆炸图 3000LBS/3500LBS/4000LBS/4500LBS Diagrams and part number TX4500 Winch Parts List Assembly Drawing 由 Autodesk 教育版产品制作 material no.
MOUNTING PLATE DIMENSION 124 mm 63m m m m 76 124 mm 未命名-1 未命名-1 18 未命名-7 18 2020/5/22 星期五 7:37:01 2020/5/22星期四 星期五 16:59:26 7:33:26 2020/5/21
1363kg 166:1 4.8 12.8 325 1.9 50 117 121 3.3 83 50 5.5 15 325x117x121mm INSTRUVTION ATV-3000-4500lbs �0��� � �� � ��� � � � 未命名-1 19 未命名-1 未命名-7 19 3000-4500lbs-S型-新.indd INSTRUVTION ATV-S型.
1590kg 166:1 4.8 12.8 325 1.9 50 117 121 3.3 83 50 5.5 15 325x117x121mm INSTRUVTION ATV-3000-4500lbs INSTRUVTION ATV-S型.indd 20 �0��� � �� � ��� � � � � � � � 未命名-1 未命名-1 20 未命名-7 20 3000-4500lbs-S型-新.
4000 4000 1818kg 166:1 4.8 12.8 325 1.9 50 117 121 3.3 83 50 5.5 15 325x117x121mm INSTRUVTION ATV-3000-4500lbs INSTRUVTION ATV-S型.indd 21 �0��� � �� � ��� � � � � � � � 未命名-1 未命名-1 21 未命名-7 21 3000-4500lbs-S型-新.
4500 4500 2045kg 166:1 4.8 12.8 325 1.9 50 117 121 3.3 83 50 5.5 15 325x117x121mm INSTRUVTION ATV-3000-4500lbs INSTRUVTION ATV-S型.indd 22 未命名-1 未命名-1 22 未命名-7 22 3000-4500lbs-S型-新.
Rated Iine 5000Ibs(2272kg) Gear reduction ratio: Motor: 166:1 permanent magnet motor 1.5hp/1.1kw(DC12V) Overall dimensions:15.5”(L)X4.6”(W)X4.8”(H) 394(L)MMX117(W)MMX121(H)MM Drum size: Ø1.9”(D)X5”(L) Ø50(D)mmx127(L)mm Ø7/32”(D)X50’(L) Cable: Ø5.5mm(D)X15mm(L) Weight: Line pull 23lbs(10.6kg) Line speed(ft/min,m/min) Motor cutre(Amt) (lbs/kgs) 5000(2272) 未命名-1 23 2.1(0.
未命名-1 未命名-1 24 未命名-7 24 2020/5/22 星期五 7:37:02 2020/5/22星期四 星期五 16:59:27 7:33:27 2020/5/21