Instructions/Assembly Guide

920350C / 920351C
FAUTEUIL DE DIRECTION
INSTRUCTIONS DE MONTAGE
© Office Star Products décembre, 2021
PROLINE II LIMITED WARRANTY
ProLine II chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
 •Leatherisnotwarrantedagainstroutinescratchingandscufng,asleatherissubjecttominorblemishesinuse.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization. At it’s
optionOfceStarProductswill:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on
 componentsstillinwarrantywillbepaidbyOfceStarProducts.
*All warranties are limited to the original purchaser for normal commercial usage dened as a standard forty hour work week by persons weighing 250 lbs.
or less. The 54666 is for persons weighing 300 lbs. or less. The 7103M, 7602R, 7605R, 7600R, 81108, 81308 & 81608 are for persons weighing 400 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Ofce Star Products. The warranty does not cover cosmetic damage that may result from normal Wuse. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a ve
year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specic legal rights, and you may also have other rights which vary
from state to state. All Pro Line II chairs are built to meet or exceed ANSI BIFMA standards.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by war-
rantywill be paid by Ofce Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
PartsDepartmentwilldoeverythingpossibletopromptlyremedytheproblem.Contactusviae-mailparts@ofcestar.net,byFax1-909-930-5629,ortollfree
partsnumber1-800-950-7262,MondaythroughFriday8:00a.m.-3:30pm.PacicTime.
920350C / 920351C
MANAGER’S CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1)
up. To lower seat height sit on chair and pull lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• LOCKING TILT ADJUSTMENT
 Forindividualcomfort,thischairhasbeenequippedwith
 anadjustmentthatwillallowtheusertochangethe
tension of the tilting feature. Turn knob (2) clockwise to
increase tension and counter-clockwise to decrease or
ease the tension. To lock return chair to the upright
position and push lever (1) in. To unlock pull lever (1) out.
NOTE:Becarefulnottoloosenbacktiltadjustmentknob
completely.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Disposeofpackingmaterialproperly.Donotuseplasticcoveras
head covering. It may cause suffocation.
6. Donotusechairasastepladder.
7. Usethischairforitsintendedpurposeonly.
8. Use mild detergent only for cleaning.
920350C
920351C
1
2
1
2
ÉTAPE 1 ÉTAPE 2
ÉTAPE 4 ÉTAPE 5 ÉTAPE 6
ÉTAPE 3
FRONT
FRONT
FRONT
DÉTAIL A
DÉTAIL B
5
6
9
5
6
9
2
3
3
1
5
4
8
6
11
7R
10
11
11
11
7L
10
12
12
5
PART QTÉ
1. Base ...........................1
2. Roulettes ........................5
3. Vérin pneumatique .................1
4. Plaque du siège ...................1
5. Coussin du siège ..................1
6. Dossier..........................1
7.Bras(7Let7R) ....................2
8. Vis de plaque du siège ..............4
9. Vis du dossier ....................4
10. Vis de bras ......................4
11. Bouchon........................4
12. Bouchon en plastique ..............4
13. Clé Allen (non montré)..............1
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la
liste et vérier que les quantités des pièces reçues sont correctes.
ÉTAPE 1Insérercinqroulettes(2)danslabase(1),lespoussertrèsfortjusqu’àcequevousentendiez
ou sentiez la roulette (2) s’enclencher. Insérer le vérin pneumatique (3) dans la base (1).
ÉTAPE 2 Fixerledossier(6)aucoussindusiège(5)àl’aidededeuxvisdudossier(9)pourlestrous
arrièreducoussindusiège(5).VOIR LE DÉTAIL A. NE PAS SERRER COMPLÈTEMENT LES VIS.
Fixezlestrousavantàl’aidededeuxvisdudossier(9).VOIR LE DÉTAIL B. SERRER COMPLÈTEMENT
TOUTES LES VIS À L’AIDE DE LA CLÉ ALLEN (13)
ÉTAPE 3Fixezlaplaquedusiège(4)aucoussindusiège(5)aveclaècheversl’avantdelachaiseavec
quatre vis de plaque du siège (8). SERRER COMPLÈTEMENT LES VIS À L’AIDE DE LA CLÉ
ALLEN (13)
ÉTAPE 4 Placer le siège assemblé sur le vérin pneumatique (3) et mettre de la pression.
ÉTAPE 5Fixezlesbras(7Let7R)aucoussindudossier(5)etdossier(6)avecdeuxbouchones(11)et
deuxvisdebras(10)pourchaquebras(7).SERRER COMPLÈTEMENT LES VIS À L’AIDE DE LA CLÉ
ALLEN (13).
IMPORTANTE : Assurez-vous que les bouchons (11) sont dans la bonne position. Les extrémités longues
doivent épouser la forme des coussin du siège (5) et dossier (6) an de s’asseoir à plat.
ÉTAPE 6 Couvrirlestrousdanslesbras(7Let7R)àl’aidededeuxbouchonsenplastique(12)pour
chaquebras(7).
ATTENTION: AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR SERRÉ COMPLÈTEMENT
TOUTES LES VIS.