Use and Care Manual

© Office Star Products septembre 2017
99661W / 99662C / 99663B / 99666S / 99667T
VERTICAL MESH BACK MANAGER’S CHAIR
OPERATING INSTRUCTIONS
PROLINE II LIMITED WARRANTY
ProLine II chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or less.
The 54666 is for persons weighing 300 lbs. or less. The 39200, 39202, 39203, 81108, 81308 & 81608 are for persons weighing 400 lbs. or less. This warranty will not
cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office
Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user
assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric is warranted
for one year. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. All ProLine II chairs meet or exceed
ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our Parts
Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free parts number
1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every three months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover as head covering.
It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
1
3
2
4
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1) up. To lower seat height sit
on chair and pull lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• 2-TO-1 SYNCHRO TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an adjustment that will allow
the user to change the tension of the tilting feature. Turn knob (4) clockwise to increase
tension and counter-clockwise to decrease or ease the tension. Turn lever (2) down to
lock. To unlock, turn lever (2) up.
NOTE: Be careful not to loosen back tilt adjustment knob completely.
• SEAT SLIDER ADJUSTMENT
To slide seat forward or backward, pull knob (3) out. Push knob (3) in to lock desired
seat position.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (5) in to allow the arms to move up or down freely.
Release button (5) once the desired height is reached.
• FLEXIBLE LUMBAR SUPPORT (PATENT PENDING)
• BACK HEIGHT ADJUSTMENT (PATENT PENDING)
To raise or lower backrest, lift levers (6) up to allow backrest to move up or down freely,
press levers (6) down to lock backrest into position.
5
6
66
99661W / 99662C / 99663B / 99666S / 99667T
FAUTEUIL DE DIRECTION AVEC
DOSSIER MAILLÉ VERTICAL
INSTRUCTIONS DE MONTAGE
PIÈCE QTÉ
1. Base ..............................1
2. Roulettes ..........................5
3. Vérin pneumatique ...................1
4. Mécanisme .........................1
5. Coussin du siège ....................1
6. Dossier ............................1
7. Bras (8L et 8R) ......................2
8. Bouton avec rondelles ................2
9. Vis du mécanisme ...................4
10. Vis avec rondelles ..................3
11. Support du dossier (préinstallé) ........1
12. Clé Allen (non illustré) ...............1
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les quantités des
pièces sont correctes.
ÉTAPE 1 Insérer cinq roulettes (2) dans la base (1), les pousser très fort jusqu’à ce que vous entendiez ou sentiez la roulette (2) s’enclencher. Insérer le vérin
pneumatique (3) dans la base (1).
ÉTAPE 2 Fixer les bras (7L et 7R) au coussin du siège (5) en utilisant un bouton avec rondelles (8) pour chaque bras (7). RESSERRER COMPLÈTEMENT
TOUS LES BOUTONS (8).
ÉTAPE 3 Fixer le mécanisme (4) au coussin du siège (5) avec quatre vis du mécanisme (9). RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC
CLÉ ALLEN (12).
ÉTAPE 4 Fixer le support du dossier (11) au mécanisme (4) avec trois vis avec rondelles (10). RESSERRER COMPLÈTEMENT TOUTES LES VIS
AVEC CLÉ ALLEN (12).
ÉTAPE 5 Placer le siège assemblé sur le vérin pneumatique (3) et mettre de la pression.
ATTENTION : AVANT D’UTILISER LE FAUTEUIL, VOUS ASSURER D’AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
2
3
4
6
7L
1
7R
8
9
11
8
10
5