Instructions/Assembly Guide

EC91150
EXECUTIVE HIGH BACK BONDED LEATHER CHAIR
OPERATING INSTRUCTIONS
EC91150
FAUTEUIL EXÉCUTIF À DOSSIER HAUT FINI
EN CUIR RECONSTITUÉ
INSTRUCTIONS DE MONTAGE
© Office Star Products décembre, 2021
WORK SMART LIMITED WARRANTY
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
 •Leatherisnotwarrantedagainstroutinescratchingandscufng,asleatherissubjecttominorblemishesinuse.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization. At it’s
optionOfceStarProductswill:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on
 componentsstillinwarrantywillbepaidbyOfceStarProducts.
*All warranties are limited to the original purchaser for normal commercial usage dened as a standard forty hour work week by persons weighing 275 lbs. or less.
The BC9601 is for persons weighing 300 lbs. or less. The BC9602 is for persons weighing 400 lbs. or less. The BC9603 is for persons weighing 500 lbs. or less.
EX1098, EC1283C & ECH12801 are for persons weighing 350 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence,
alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Ofce Star Products. The warranty does not cover cosmetic dam-
age that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this
product. When usage is more than 40 hours per week, a two year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specic
legal rights, and you may also have other rights which vary from state to state. All Work Smart chairs are built to meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
PartsDepartmentwilldoeverythingpossibletopromptlyremedytheproblem.Contactusviae-mailparts@ofcestar.net,byFax1-909-930-5629,ortollfree
partsnumber1-800-950-7262,MondaythroughFriday8:00a.m.-3:30pm.PacicTime.
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1) up.To
lower seat height sit on chair and pull lever (1) up.
NOTE: It is normal for chair to slightly lower under body weight.
• LOCKING TILT ADJUSTMENT
 Forindividualcomfort,thischairhasbeenequippedwithan
 adjustmentthatwillallowtheusertochangethetensionofthe
tilting feature. Turn knob (2) clockwise to increase tension and
counter-clockwise to decrease or ease the tension. To lock
return chair to the upright position and push lever (1) in. To
unlock pull lever (1) out.
NOTE:Becarefulnottoloosenbacktiltadjustmentknobcompletely.
• ARM HEIGHT ADJUSTMENT
 Toadjustarmheight,pushbutton(3)intoallowthearmstomoveup
or down freely. Release the button (3) once the desired height
is reached.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three months or
as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover as head
covering. It may cause suffocation.
6. Donotusechairasastepladder.
7. Usethischairforitsintendedpurposeonly.
8. Use mild detergent only for cleaning.
ÉTAPE 1 ÉTAPE 2
ÉTAPE 4 ÉTAPE 5
ÉTAPE 3
9
3
4
6
6
3
11
10
7
8L
6
8R
1
2
10
5
PIÈCE QTÉ
1. Base ...........................1
2. Roulettes ........................5
3. Vérin pneumatique .................1
4.Souett .........................1
5. Plaque du siège ...................1
6. Coussin du siège ..................1
7. Coussin du dossier .................1
8. Bras (8L et 8R) ....................2
9. Vis courte........................4
10. Vis longue ......................8
11. Capuchon en plastique .............8
12. Clé Allen (non montré)..............1
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérier que les quantités des
pièces reçues sont correctes.
ÉTAPE 1Insérercinqroulettes(2)danslabase(1),lespoussertrèsfortjusqu’àcequevousentendiezousentiezlaroulette(2)s’enclencher.Insérerlevérin
pneumatique(3)danslabase(1)etglisserlessoufets(4)surlevérinpneumatique(3).
ÉTAPE 2Fixezlaplaquedusiège(5)aucoussindusiège(6)aveclaècheversl’avantdelachaiseavecquatreviscourte(9).SERRER COMPLÈTEMENT
TOUTES LES VIS LA CLÉ ALLEN (12).
ÉTAPE 3 Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
ÉTAPE 4Fixezlesbras(8Let8R)aucoussindusiège(6)etcoussindudossier(7)enutilisantquatrevislongues(11)pourchaquebras.
SERRER COMPLÈTEMENT TOUTES LES VIS LA CLÉ ALLEN (12).
ÉTAPE 5 Couvrez les trous dans les bras (8L et 8R) en utilisant quatre capuchons en plastique (11) pour chaque bras.
ATTENTION: AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.
2
1
3