Installation Guide

25” & 30” TABOURET CARRÉ MÉTRO
INSTRUCTIONS DE MONTAGE
25” & 30” SQUARE METRO STOOL
OPERATING INSTRUCTIONS
WARNING
1. Do not use this product unless all screws and bolts are
securely tightened.
2. Check that all screws and bolts are tight every three
months or as needed.
3. Dispose of packing material properly. Do not use plastic
cover as head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
LIMITED WARRANTY
Home Star Products Warrants, to the original purchaser its products to be free from defects in material and workmanship for a period of 90 days.
Defects and damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control
of Home Star Products is not covered. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
To make a warranty claim, contact Customer Service, provide model number, sales receipt and description of the problem. It is the customer’s
responsibility to prepay freight on any components returned to the factory. Home Star Products will pay return freight on components covered
under terms of warranty.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when hardware is missing.
Our Parts Department will do everything possible to promptly remedy the problem. Contact us via email parts@officestar.net, by Fax
1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Home Star Products P.O.
Box 3520 Ontario, California 91761 USA
PIÈCE QTÉ
1. Coussin ..................1
2. cadre des pattes ...........2
3. barres de tension ...........2
4. longues vis à bois ..........4
5. courtes vis à bois ...........4
6. goujon en bois .............4
7. bouchons en bois ..........8
8. Clé Allen (Non montré) ......1
Note importante :
1. Utiliser les outils à main pour l’assemblée comme
des outils électriques
peut causer des endommagements.
2. Retirer les agrafes utilisées pour l’emballage
soigneusement.
5
4
1
6
2
7
3
5
4
5
7
4
5
4
6
5
2
2
2
2
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et
vérifier les quantités des pièces.
ÉTAPE 1. Placer le coussin (1) vers le bas sur une surface douce. Insérer quatre goujons en bois (6) dans le rail en
bois du coussin.
ÉTAPE 2. Aligner un cadre des pattes (2) aux épingles de goujons en bois (6) sur le rail en bois du coussin et sécuriser en
utilisant deux longues vis à bois (4). Ensuite, attacher deux barres de tension (3) au cadre des pattes (2) et sécuriser en utilisant
deux courtes vis à bois (5).
ÉTAPE 3. Aligner le cadre des pattes (2) restant au goujon en bois (6) dans le rail en bois du coussin et sécuriser en utilisant
deux longues vis à bois (4). Attacher les barres de tension (3) en utilisant deux courtes vis à bois (5). SERRER TOUTES LES VIS
COMPLÈTEMENT.
ÉTAPE 4. Recouvrir les trous des vis à bois avec huit bouchons en bois (7).
ATTENTION: AVANT D’UTILISER LE TABOURET, S’ASSURER D’AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.
© Office Star Products mai 2007