TAOG06 FAUCETS - RUBINETTI ACUTAOG06 L/P/C (USA) - ACETAOG06 L/P/C (EU) INSTRUCTIONS for installation and care ISTRUZIONI D'INSTALLAZIONE E MANUTENZIONE
Officine Gullo
TABLE OF CONTENTS INDICE TAOG06L......................................................................4 PRODUCT DIMENSIONS.......................................................................................................4 DIMENSIONI PRODOTTO......................................................................................................4 PRODUCT APPEARANCE.......................................................................................................5 IMMAGINI DEL PRODOTTO................
TAOG06L ACUTAOG06L (USA) ACETAOG06L (EU) PRODUCT DIMENSIONS DIMENSIONI PRODOTTO 4 Officine Gullo
PRODUCT APPEARANCE IMMAGINI DEL PRODOTTO TAOG06L OB BURNISHED BRASS OTTONE BRUNITO Officine Gullo TAOG06L CL CHROMED BRASS OTTONE CROMATO TAOG06L NS NICKELED BRASS OTTONE NICHELATO SATINATO 5
INSTALLATION GUIDELINES IMPORTANT: The owner/user of this product must keep this information for future reference. To ensure this product is installed properly, you must read and follow these guidelines. This product must be installed by a professional licensed contractor. Be sure your installation conforms to your Country codes. Product should be on-site prior to rough-in. This allows the installer to visualize the installation and verify the center spread.
Officine Gullo 7
Officine Gullo
Officine Gullo 9
Officine Gullo
Officine Gullo 11
TAOG06P ACUTAOG06P (USA) ACETAOG06P (EU) PRODUCT DIMENSIONS DIMENSIONI PRODOTTO 12 Officine Gullo
PRODUCT APPEARANCE IMMAGINI DEL PRODOTTO TAOG06P OB BURNISHED BRASS OTTONE BRUNITO Officine Gullo TAOG06P CL CHROMED BRASS OTTONE CROMATO TAOG06P NS NICKELED BRASS OTTONE NICHELATO SATINATO 13
INSTALLATION GUIDELINES IMPORTANT: The owner/user of this product must keep this information for future reference. To ensure this product is installed properly, you must read and follow these guidelines. This product must be installed by a professional licensed contractor. Be sure your installation conforms to your Country codes. Product should be on-site prior to rough-in. This allows the installer to visualize the installation and verify the center spread.
Officine Gullo 15
Officine Gullo
Officine Gullo 17
Officine Gullo
Officine Gullo 19
TAOG06C ACUTAOG06C (USA) ACETAOG06C (EU) PRODUCT DIMENSIONS DIMENSIONI PRODOTTO 20 Officine Gullo
PRODUCT APPEARANCE IMMAGINI DEL PRODOTTO TAOG06C OB BURNISHED BRASS OTTONE BRUNITO Officine Gullo TAOG06C CL CHROMED BRASS OTTONE CROMATO TAOG06C NS NICKELED BRASS OTTONE NICHELATO SATINATO 21
INSTALLATION GUIDELINES IMPORTANT: The owner/user of this product must keep this information for future reference. To ensure this product is installed properly, you must read and follow these guidelines. This product must be installed by a professional licensed contractor. Be sure your installation conforms to your Country codes. Product should be on-site prior to rough-in. This allows the installer to visualize the installation and verify the center spread.
Officine Gullo 23
Officine Gullo
Officine Gullo 25
Officine Gullo
Officine Gullo 27
DETAILS Top Thickness Minimum : Top Thickness Maximum: Number of holes : Hose or Inlet Connection Size : 1/2 NPT (USA) - 1/2 GAS (EU) Total Height: 14 9/16" - 369 mm Spout Height : / Spout Reach: 20 9/16" - 522 mm Spout Swivel : Yes Number Of Handles: 2 Primary Material: Brass Installation Type: Wall Mounted Valve Material: Ceramic Water Pressure: 70.0 / 20,0 / 45,0 Psi - 5 / 1,5 / 3 atm Suggested Application: Bar, Kitchen, Laundry Handle Spread Minimum : / Handle Spread Maximimun : / Flow rate: 1.
Officine Gullo 29
CARE AND CLEANING INSTRUCTIONS GENERAL CLEANING GUIDELINES Wash surfaces gently with a soft damp cloth; use a neutral liquid soap with water for daily cleaning. Rinse completely with water, dry any overspray. Never use an abrasive material such as a brush or scouring pad to clean surface. The use of abrasive cleaners, cleansers or disinfectants will damage the surface finish and void the warranty.
PULIZIA E MANUTENZIONE INDICAZIONI GENERALI Lavare le superfici delicatamente con un panno morbido umido; usare un sapone neutro liquido per la pulizia giornaliera. Sciacquare accuratamente con acqua e asciugare. Non usare mai materiali abrasivi quali spazzolini o panni abrasivi per pulire le superfici. L'uso di detergenti abrasivi o disinfettanti potrevve danneggiare la finitura ed invalidare la garanzia.
us/eu V 1.0 - 11.18 Via Della Torricella 29, Antella, Bagno a Ripoli 50012 Florence - Italy Tel. +39 055 65 60 3324 / +39 055 62 18 07 Fax. +39 055 62 06 70 officinegullo.com | info@officinegullo.
