User Manual

Step 1: Insert 1 beech wooden leg (C) to the other wooden beech leg(B) as below

drawing showing .Make sure the front label on two legs facing each other

as below drawing showing. Use 1 screws(G) ﬁx the 2 wooden leg. Tighten

all screws with Wrench (D) .

Step 2: Remove 4 white plugs under the seat(A). put 4 black plasc gaskets (H)on

the seat(A). Aach the leg to the seat (A) ,use 4 screws (G) with 4 spring

washer (F) and 4 gasket (E) ﬁx the wooden leg to the seat, Tighten all screws

with Allen Wrench (D).

１

２

Ｃ

Ｂ

Ａ

Ｈ

Ｅ

Ｆ

Ｇ

PAGE 1
Step 1: Insert 1 beech wooden leg (C) to the other wooden beech leg(B) as below drawing showing .Make sure the front label on two legs facing each other as below drawing showing. Use 1 screws(G) ﬁx the 2 wooden leg. Tighten all screws with Wrench (D) . Step 2: Remove 4 white plugs under the seat(A). put 4 black plastic gaskets (H)on the seat(A). Attach the leg to the seat (A) ,use 4 screws (G) with 4 spring washer (F) and 4 gasket (E) ﬁx the wooden leg to the seat, Tighten all screws with Allen Wrench (D).