Manual

D
Base
1 pc.
B
Gas Lift
1 pc.
C
Telescopic
Bellows
1 pc.
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
Please read all instructions before assembly.
See Drafting Kit instructions for 200-DK
before starting assembly.
Step 1: Insert Casters (A) into Base (D).
If you are assembling a model with a DK Foot Ring please proceed
to subsequent pages for drafting kit assembly instructions.
Step 2: Insert Gas Lift (B) into Base (D).
Step 3: Cover Gas Lift (B) with 3 piece Telescopic Bellows (C).
Step 4: Insert base/gas lift assembly into chair
mechanism under seat and press down firmly to lock.
STOP
STOP
A
Caster
5 pcs.
E
Chair Body
1 pc.
01.03.2014
Assembly Notes:
During assembly, hand tighten screws only. When all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
Models: 200 / 200-DK Martisa Series Swivel Chair
WEIGHT CAPACITY: 250 lbs.
Parts Listing
4
D
A
1
B
D
2
C
B
3
E
161 Tradition Trail, Holly Springs, NC, 27540
800-520-7471 (voice) 919-362-4765 (fax)
919-303-6389 (voice) www.ofminc.com
[e-mail]