User Manual

403
405
Assembly Notes:
During assembly, hand tighten screw only when all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
Model 403 / 403-VAM / 405 / 405-VAM Guest / Reception Chairs
WEIGHT CAPACITY: 250 lbs.
Parts Listing
STOP
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
Please read all instructions before assembly.
Step 1: Mount both sides of Seat Cushion (A) onto
the bottom rib of the steel frame (C or D), with special
coated Ni-Lock Screws (E) and tighten with screwdriver.
Step 2: Place the Back Cushion (B) onto the back rib on top
of the side Steel Frame (C or D), attach it with the
Hex Screws (F) and tighten with screwdriver.
919-362-4765 (fax)
www.ofminc.com
161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice)
[e-mail]
F
6 mm Hex Screws
4 pcs.
E
M8 Ni-Lock
Hex Screws
8 pcs.
A
Seat Cushion
B
Back Cushion
C
Steel Frame
Armless
1 pair
D
Steel Frame
with Arm
1 pair
1
C/D
E
A
2
F
B
03.24.2010