User Manual

A
Chair Seat
1 Unit
B
Chair Base
1 Unit
C
Arm Rests
2 Units
D
Casters
5 Units
E
Gas Lift
1 Unit
F
Seat Mechanism
1 Unit
I
8mm Hex Screw
4 Units
J
6mm Hex Screw
4 Units
L
6mm Washer
4 Units
M
Screw Cap
4 Units
Assembly Notes:
During assembly, hand tighten screw only when all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
Model 510-L / 511-L Sharp Executive Leather Chair
WEIGHT CAPACITY: 250 lbs.
Parts Listing
STOP
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
Please read all instructions before assembly.
Step 1: Insert Casters (D) into Chair Base (B). Insert Gas Lift (E) into hole in
Chair Base (B).
Step 2: Attach Arm Rests (C) to sides of Chair Seat (A) using 8mm Screw (I).
Tighten with Allen Wrench.
Step 3: Attach Seat Mechanism (F) to the bottom of Chair Seat (A) using
6mm Screws (J) and 6mm Washers (L).
Step 4: Place chair body onto Chair Base (B) by inserting top of Gas Lift (E)
into hole in the center of Seat Mechanism (F). Press down firmly on
Chair Seat (A) to secure onto Chair Base (B).
Step 5: Cover screw holes with Screw Caps (M). Press in firmly.
919-362-4765 (fax)
www.ofminc.com
161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice)
[e-mail]
06.09.2010
2
A
C
I
4
E
D
B
1
3
J
L
F
A
Front
5
M