LED Edition 2.4G DSSS Technology 3-Channel 2.4G Radio Control System INSTRUCTION MANUAL • Before using, read this manual carefully AUX Channel Steering Trim Steering Wheel TRIM LED Power Switch Charging Jack Bind Switch Throttle Trim St. Dual Rate Throttle Trigger Battery Box CAUTION • To use your Radio with your models correctly and safely, read this manual carefully and keep it in a safe place for future reference. Warning: 1. This product is only equipped for radio controlled cars; 2.
Steering Dual Rates Setup ST.TRIM INC ST.DR TH.TRIM LEFT DEC RIGHT MID NOR REV POWER ST.DR ST. ST.D/R SW TH. •DEFINITION: Steering Dual Rate (ST. DR): Is the adjustment that allows the dual rate value (maximum servo travel) to be increased (INC) or decreased(DEC) with in a range of 0% to 100% of the steering servo. This functions very useful in a race conditions as it allows you to tailor the steering radius and sensitivity for the current track conditions. •ADJUSTMENT: 1.
2.4Ghz Binding •Press and hold the bind button on the front of the transmitter while turning ON the power switch button until the (ST.DR) LED Flashes. 2. With the system hooked up as shown, insert the binding cable in the charging plug receptacle. Turn on the power of the receiver (4.8 - 5.6V), and now the LED should be flashing indicating that the receiver is ready to bind. Flashing LED Plug In Binding cable STEP 2 Power Switch (turn on) Receiver 3.
B4218 ESC Instruction and Specification WARNING ELECTRIC MOTOR AND ESC ARE EXTREMELY HOT AFTER RUNNING, CAN CAUSE SERIOUS INJURY, HANDLE WITH CARE •Special Features: 1. Exclusive feature for this model. Auto set to neutral position on the throttle. No programming or adjustment is required.
•Throttle Neutral and ESC setting: FIG. 5 1. Switch on the transmitter. 2. Set the throttle trim to the middle or the green LED on your Transmitter “TH” 3. Switch on the power of the ESC 4. The ESC will sound 3 beeps (DO RE MI) confirmation, indicating the ESC is ready & the throttle is at neutral position. •Operating Instructions: 1. Connect the ESC wires to the motor. (Blue is neg and Orange is Positive See Fig. 5) 2. Plug the receiver wire into the throttle or #2 channel on the receiver 3.
Warranty Period OFNA warranties that the Products purchased (the “Products”) will be free from defects in materials and workmanship at the date of purchase by the Purchaser. Limited Warranty (1) This warranty is limited to the original Purchaser (”Purchaser”) and is not transferable. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. This warranty covers only those Products purchased from and authorized OFNA dealer.
TO: OFNA TECHNICAL SUPPORT 7 VANDERBILT, IRVINE, CA 92618 TODAY’S DATE: month________day______ 1. Print out form. 2. Fill out the form completely. 3. Make a copy of purchase receipt. All replacements/repairs will not be processed, unless accompanied by proof that item(s) was purchased. 4. Call OFNA technical support at (949)586-2910 for assistance. 1. Your name ____________________________ 2. Your address: ____________________________ ____________________________ 3.
53353 53060 53360 53351 53355 53366 53354 53368 53324 53352 53321 53356 53357 53309 53058 53373 53358 53372 53361 53369 53362 53371 53375 53370 53316 53324 53364 53315 53365 53363 53367 53374 53012 OFNA 53012 53024 53058 53060 53309 53312 53315 53316 53318 53321 53324 53351 53352 53353 53354 53355 53356 53357 53121 HYPER 18 SG W/PULLSTART DESCRIPTIONS BEARING,FRONT 7x19x6mm HEX AXLE, PULL START, HYPER BARREL STOP SCREW, HYPER MAIN NEEDLE AND SEAL, HYPER CLIPS, G, 5PCS CAP SCREW 3x16m
HYPER 18 ENGINE PART # 53121 Thank you for purchasing a OFNA engine. We appreciate your choice and know you will enjoy running it. Please note that the OFNA information in engine box is subject to change without notice. NEW ENGINE BREAK-IN Your OFNA engine is extremely tight when the piston is at the top of the stroke and turning the crankshaft by hand. This is normal for a new ABC type engine. The piston and sleeve are matched for fit and the top of the sleeve is tapered for a tight fit.
11066 21006 21003 11066 21003 21003 21004 21003 21003 21004 11066 21004 21003 21001 94046 1000wt Silicone 11066 11066 21003 21038 21003 21003 21004 21003 21003 21004 11066 21003 21037 Steel for Nitro 21317 Delrin for Electric 94046 5000wt Silicone
94034 21005 21005 11065 21002 21002 21007 21007 11065 21015 21014 94002 21014 x 4 22012 21015 36870 21016 36870 21012
11066 11066 21017 18075 21017 18075 21017 94043 21028 21029 21028 21029 21009 94043 21009 21029 21123 94004 21029 21029 21123 94004
21008 94005 21008 94005 21030 21018 x 4 21018 21018 94005 21018
94033 94034 94049 21018 21019 21028 21029 21011 21029 21028 3.
21033 94033 21033 21033 21033 21013 94002 21036 21036 21023 21023
94002 21019 94004 94003 21058 21026 11066 21025 21017 11066 18075 18075 21017 36870 94041 21027 21059 21059
123 94004 21029 21123 21028 21029 21024 21028 21029 21029 94043 21021 21021 94043 21030 19031 94038 94003 19031 21020
94004 94041 21022 21035 21035 94005 21022
21018 21018 21018 94005 21018 94033 94034 21018 21031 94021 21031 21031 94020 21031
21031 94002 94005 94033 21032 90020 21058 21032 21032
21244 94020 21019 21241 94019 21039 x 2 19052 21077 19052 21077 21039 21040
21041 21042 21041 21039 21041 21041 94002 21042 94033 21242 94019 21242 21242 21242 94038 10097 28061 28061 10097 21054 21054 21041
10010 10010 10101 10101 94056 10410 10410 10410 18077 10410 21055 94017 94018 21054 21055
21243 21044 94019 10067 10067 10181 10181
94034 94026 19082 10177
94033 21050 94041 21050 21050 21050 21049 94002 94022 21050 21050 21049 94002 21049 21049 21047 21049 21049 10282
21046 21046 94001 21046 21046 21046 28061 28081
94017 21053 21053 21052 29056 21052
21036 21035 21036 21035 21067 21228 21064 21228 21062 21228 21228 22012 90020 21067 21228 21062 21067 21065 21228 21228 21228 22012 90020 21067
21063 21067 21064 Cap/Shock Body Front 21065 Cap/Shock Body Rear 21066 19018 21067 21068 21068
19031 94005 94038 94005 21245 21246
10993 10993 10993 10993 21071 21071
21248 Clear 21249 Blue 21250 White 22086
FOLLOW STEPS A TO H FOR ELECTRIC VERSION TO INSTALL CENTER DIFF AND MOTOR MOUNT.
C 94005 94005 21302 D Battery not included 21307 21304
E 21304 94019 94019 F 21303 94017 94002 21049 94002 94017 94017
G 29076 29076 29076 21035 H 21036
Factory setup
21001 21011 21021 21031 21041 29056 21002 21012 21022 21032 21042 21052 21003 21013 21023 21033 21241 21053 21004 21014 21024 21034 21044 21054 21005 21015 21025 21035 21243 21055 21006 21016 21026 21036 21046 22084 21007 21017 21027 21037 21047 22071 21008 21018 21028 21038 10181 21058 21002 21019 21029 21039 21002 21020 21030 21040 21049 21050 21059
21242 21244 21070 22012 21071 10101 21253 21281 21228 18075 21248 21062 21249 22075 18077 11064 21063 22086 28061 28081 28087 21064 21246 10097 10282 21251 21065 21245 11065 10993 21252 21066 19082 11066 21067 21077 22087 19018 21068 21078 10010 19031 21069 21079 29073 10177
OFNA 10010 10097 10101 10177 10181 10282 10985 11064 11065 11066 18075 18077 19018 19031 19082 21001 21002 21003 21004 21005 21006 21007 21008 21009 21011 21012 21013 21014 21015 21016 21017 21018 21019 21020 21021 21022 21023 21024 21025 21026 21027 21028 21029 21030 21031 21033 21034 21035 21036 21037 21038 21039 21040 21041 21042 21044 21046 21047 21050 21051 21052 21053 DESCRIPTIONS HYPER TT PARTS LISTS CLUTCH SHOES, BLACK, 3 SHOES CLUTCH NUT SG HYPER SPRINGS,CLUTCH,GOLD 1.1M 3PCS FUEL LINE 2FT.