Instruction Manual

ASSEMBLY OF THE RADIO TRAY ONTO CHASSIS
3X10MM
Flat Head
Screw
3X10MM
Flat Head
Screw
3X10MM
Flat Head
Screw
3X10MM
Flat Head
Screw
#30560
Antenna Tube
3x10mm
Tapping
Screw
3 x 10mm
Tapping Screw
ASSEMBLY OF THE THROTTLE LINKAGE SYSTEM
3X3mm
Set Screw
3X3mm
Set Screw
3X3mm
Set Screw
Plastic Collar
* Take the plastic collar
from brake system plastic
parts. P/n #30800
Throttle
Spring
#10300
Alum.Stopper
#30800
Throttle and Brake Linkage Parts
(Plastic and all Hardware shown)
#10300
Alum.Stopper
* Snap On.
#30530
Plastic Throttle
Ball Joint
2mm Rod
Fuel
Tube
( 6mm )
Idle Position
Brake
Full Throttle
* Align throttle servo same
as shown.
3 x 10 mm Flat Head
Screw
Use Alum. CNC posts for
radio tray and not plastic
type as shown!
ASSEMBLY OF THE RECIVER BOX
* Use the screw provided
with your radio.
Switch
(with radio)
#10280
Switch Cover
2x8mm
Screw
2x8mm
Screw
2x8mm
Screw
2x8mm
Screw
2x8mm
Screw
* Use the horn & screw provided
with your radio.
* Use the horn & screw provided
with your radio.
3x10mm
Tapping
Screw
2mm Rod
ASSEMBLY OF THE RADIO TRAY ONTO
RECEIVER BOX
* Insert Into Receiver
Box and connect to
receiver.
Receiver Box
Cover
3x25mm
Screw
Antenna
Wire
Receiver & Battery
* Put the receiver and
battery into box.
* Keep radio and battery
from moving in box. Pack
with foam.
#36780
Receiver & Battery Box