Instructions / Assembly

ohanadepot.com Fire Pit Table 14
OPERATION
WARNING: DO NOT ATTEMPT TO OPERATE THE APPLIANCE UNTIL YOU HAVE READ
AND UNDERSTAND ALL PRECAUTIONS. FAILURE TO DO SO CAN RESULT IN PROPERTY
DAMAGE, SERIOUS INJURY, OR DEATH.
CAUTION:
 Do not use an open flame to check for leakage.
 Do not smoke during testing.
 Do not test indoors.
 A leak check must be performed whenever the gas
cylinder is replaced.
NOTE:
Use only the pressure regulator supplied with this fire pit.
Replace them with those specified by the manufacturer
only.
Before Turning Gas Supply ON:
Your fire pit was designed and approved for OUTDOOR
USE ONLY. DO NOT use it inside a building or any other
enclosed area.
Make sure surrounding areas are free of combustible
materials, gasoline, and other flammable vapors or liquids.
Ensure that there is no obstruction to air ventilation.
Be sure all gas connections are tight and there are no leaks.
Be sure the access panel is clear of debris.
Be sure any component removed during assembly or
servicing is replaced and fastened prior to starting.
WARNING
FOR YOUR SAFETY:
If at any time you are unable to
light the burner and smell gas,
wait 5 minutes to allow gas to
dissipate before attempting to
light the gas appliance. If after 1
minute, you are unable to light the
burner, wait 5 minutes and allow
flammable vapors to dissipate
before attempting to light the gas
appliance.
WARNING
FOR YOUR SAFETY:
DO NOT touch or move the gas
appliance for at least 45 minutes
after use.
WARNING
Lighting operations should comply
with the Lighting Instruction section.
Improper lighting operations will
cause serious injury and explosion.