Manual

13
CommandCommand
CommandCommand
Command
CharacterCharacter
CharacterCharacter
Character
DescriptionDescription
DescriptionDescription
Description
xSxS
xSxS
xS Set stable data only printing (set x = 0 for OFF, or x = 1 for ON.
TT
TT
T Same effect as pressing on tare button.
VV
VV
V Print EPROM version
x#x#
x#x#
x# Set current ref., any function, CW takes two reference separated by
a space.
x%x%
x%x%
x% Doanloads reference weight "x" for percent mode. "x" must be in
grams. Command is ignored if percent mode is disabled. If percent
mode is enabled, balance will automatically switch to percent mode
display.
xFxF
xFxF
xF Set current function to "x". x = 0 to 6. Setup menu must be unlocked.
0 = None
1 = Percent
2 = Parts Counting
3 = Check Weighing
4 = Animal Weighing
5 = Fill Guide
6 = High Point
xZxZ
xZxZ
xZ Set Auto Zero to "x". x = 0 for OFF, x = 1 for ON
xSLxSL
xSLxSL
xSL Set stability level. User menu must be unlocked. x = 0 to 3
ZZ
ZZ
Z Zero request (Gross tare) if Net/Gross enabled.
nnnAnnnA
nnnAnnnA
nnnA Set Auto Print feature to "nnn"(see table).
nnn = 0 Turns feature OFF
nnn = S Output on stability
nnn = C Output is continuous
nnn = 1-256 Sets Auto Print interval
Esc LEsc L
Esc LEsc L
Esc L Prints listing of Setup and Print menu settings.
Esc REsc R
Esc REsc R
Esc R Resets Setup and Print menus to factory defaults.
CAUTION: This will reset RS232 configuration.
Esc SEsc S
Esc SEsc S
Esc S Save current settings.
Field: Model # 1 EPROM # CR LF
Length: 6 16 1 1
Balance Model
"98101-xx Sr#x.xx"
INSTALLATION