Manual

38
USER MENUUSER MENU
USER MENUUSER MENU
USER MENU
The User menu is used to adapt the balance to environmental conditions. It contains
submenus which enable you to turn features on or off, and program balance param-
eters.
Reset changes all submenus to original factory default settings. Reset does not
appear if menu has been locked out. AL specifies the averaging level. STB specifies
the desired stability range. Auto Zero sets the automatic zero threshold. Dual, when
set on, enables dual range function on model AP250D. End User is used to exit the
User menu and store the selections. The following figure illustrates the sequence in
which submenus appear on the User menu. Items shown in bold type are the default
settings.
USER MENUUSER MENU
USER MENUUSER MENU
USER MENU
RESET
YES/NO
AL
0,
11
11
1, 2
STABILITY
0,
11
11
1, 2, 3
AUTO ZERO
ONON
ONON
ON/OFF
-dUAL-
ONON
ONON
ON/OFF
END, User
User Menu ProtectionUser Menu Protection
User Menu ProtectionUser Menu Protection
User Menu Protection
The User menu may be locked out to prevent unauthorized personnel from changing
the settings. If -SAFE- is displayed, the User menu has been locked out. Settings
may be viewed but not changed. To lock out the User menu, refer to the section titled
Menu Lock-Out Protection.
ResetReset
ResetReset
Reset
This submenu enables you to reset all User menu selections to the factory default
settings: Averaging Level
11
11
1, Stability Range
1, 1,
1, 1,
1, Auto-Zero Tracking
ONON
ONON
ON and Dual
Range
ON. ON.
ON. ON.
ON. Reset does not appear if the menu has been locked out.
1.
.
2.
.
3.
.
4.
.
5.
to select or .
6.
. If is selected, the
balance signals a
long beep . Reset values are stored only if exited through
.
MENUS