Manual

64
ReferenceReference
ReferenceReference
Reference
When the Reference function is set ON, prints the value of weight used as a reference
in either Check Weighing, Fill Guide, Percent and Parts Counting modes. When set
to Current, the printer prints the current reference immedediately.
1. Access the
submenu under the Print Options menu
2.
.
3.
, or
.
4.
.
TimeTime
TimeTime
Time
When the Time function is set ON, allows the balance to output the current time to the
printer. To set the Time feature ON or OFF, proceed as follows:
1. Access the
submenu under the Print Options menu
2. .
3.
or .
4.
.
DateDate
DateDate
Date
When the Date function is set ON, allows the balance to output the current date to the
printer. To set the Date feature ON or OFF, proceed as follows:
1. Access the
submenu under the Print Options menu
2.
.
3.
or .
4.
.
NOTENOTE
NOTENOTE
NOTE: With Print Time or Date set to ON, if either current Time or Date has not been
set in Setup menu, "Set Time/Date !" is sent through the RS232 Interface with each
press of button.
MENUS