Instruction Book Please read the instruction manual carefully before use and take good care of it. If you do not understand the product and after-sale service, please contact the local sales department for consultation! Thank you for using our company's xx steering wheel heating system.
Preface Thanks for your choosing of our steering wheel LED system. With the improvement of social life and technologies, people have higher requirements on life’s quality, especially the requirements on higher standard to motors, and the pursuit of comfortableness and safety have been put forward to the schedule. The steering wheel LED system provides convenient and safe security for the driving process, which reduces the accidents due to the distractions in driving.
Contents 1. Products Introduction 03 Appearance instructions 03 Display and Operation Navigation Instructions 03 04 05 Technological Parameters 06 Main Functions 06 Products Feature 06 Matching Actions 06 Function Map 2.
Product Introduction I. Appearance instructions 1. Display and Operation 2 3 2 4 1 1 left L controller 2 LED light 3 displayer 4 right R controller There is a short-pressing button and a long-pressing button. Long pressing means press the L or R more than 2s. When dual-clicking, you must press the second time within 2s.
Product Introduction II.
Product Introduction III. Navigation Instructions Main Menu There are mainly four menus: ED/LED/racing/setting, choosing the related function in the menu by LK or RK. At this time there will be larger marks and related functions. By RL, you can obtain the related expected menu. Functional Unit In the functional menu, you can get the individual function menu by LK, and jumping to the first one from the last one. You can choose any functional menu by the introduction buttons.
Product Introduction II. Technical Parameters Working Voltage 12V-16V Working Current main part<40mA/ displayer<25mA Quiescent Current 3mA Applicable Temperature -40℃~+85℃ Working Frequency 2.4GHz Sensing Distance 10m III. Main Functions IV. Product Features 1. Fuel consumption details 1. New design, non-broken 2. Perception of steering wheel angle 3. Dynamic steering expression 4. Time recording 5. Dynamic sensing of rotating speed 6. Racing mileage records allocation 2.
Product Introduction I. ED Model Function ED model provides different functions for supporting the fuel-using priority. There are 10 functional units in ED model in total, and these units can be controlled by LK button. Furthermore, LED provides visual help for drivers to master the vehicle information better. There will be different arrangements based on the vehicle types, and there may be some functional unit which cannot be shown.
Product Introduction [b] oil using The oil using can be expressed as each country, and you can see the details in the chapter of setting up model. Pressing RL,it can be switched between timely oil using and average one. Timely Oil Using Timely oil using is a 10km distance for moving average, and it is updated per 100m. If it is possible, it can be shown as the choosing country. when closing the system, saving the number and keeping it the the saver no more than half an hour, and then clearing up it.
Product Introduction It timely shows the engine load rate so that to control the vehicle model. After closing the system, these date will be cleared off. Water Temperature/Oil Temperature 80℃ 100℃ 1 2 3 4 water temperature mark water temperature oil temperature oil temperature mark It timely shows the water temperature and oil temperature so that to control the vehicle model. According to the setting up , it will show the temperature with ℃ or ℉. After closing the system, these date will be cleared off.
Product Introduction It timely shows the endurance mileage so that to control the vehicle model. After closing the system, these date will be cleared off. Turbocharging -- bar 1 pressure 2 turbocharging mark It timely shows the turbocharging so that to control the vehicle model. fter closing the system, these date will be cleared off. II. LED Switching Function Through this function, you can open or close the LED so that to better control it.
Product Introduction III. Racing Model Function Racing model provides special functions for racing road. ! It cannot be used to the unsuitable roads. Drivers have the responsibility to drive in a suitable way. You cannot try dangerous driving way or it may be accidents. Racing model functions cannot be used in public roads.
Product Introduction L01 150.01km 00:52'03 Pressing RK, you can count on the time and distance for the first round. The time is is lasting 3s. During this time, the timer operates in the backstage. After 3s, it shows the time of second round from 0. L02 310.11km 01:02'03 Pressing RK, you can count on the time and distance for the second round. The time is is lasting 3s. During this time, the timer operates in the backstage. After 3s, it shows the time of third round from 0. Repetition as it.
Product Introduction IV. Setting Up Model Functions Setting up model is used to choose the LED and the individual setting up. Under the setting up model, you can press LK and RK to control, like checking in the form, which will show the mark of reversing. Due to the7 control menus, there are two showing menus,1-4 and 5-7. When transferring from 4 to 5 or from 7 to 1, the menus will change.
Product Introduction In order to decrease the luminance of displayer or LED, or you want to increase the luminance of displayer or LED, please press RK. For saving your choice, please press LL. when decreasing the luminance, you should close the displayer, so you must press LL and RL at the same time at least 2s. Speed Unit Pressing RL to choose speed mark km/h mph Pressing LK or RK to choose function, transferring from km/h and mph. Pressing LL to save the setting up and come back to the main menu.
Product Introduction Over the valve, the indicating light will shine and warn you the possible over-heating for the engine, matter what the contents are. Pressing LL to save the setting up and come back to the main menu. Pressing RL to choose oil box mark EC US UK JP Pressing LK or RK to choose function, transferring from every items.
Product Introduction The arrangements of LED are as follow: [1] LED in 50%-60%(green) [2] LED in 60%-70%(green) [3] LED in 70%-80%(yellow) [4] LED in 80%-90%(yellow) [5] LED in 90%-100%(red) 这此值为已设置的切换极限值.在达到100%的转速界限值后所有LED闪红色, 这时应执行切换过程.
Pressing LL to save the setting up and come back to the main menu Common Questions and Answers Cannot be handle after allocation? The light doesn’t work? [1] checking the current /ACC [1]checking the opening of ACC [2] checking the connection [2]checking the connection [3] checking the matching of main land and [3]checking the matching of them pressing land The backlight doesn’t work? The horn calls long time? [1] checking the switch [1]checking the matching [2] checking the connection [2]chec
Warranty Services and Policies I. Warranty Policies Thanks for your purchasing, under the normal using, you can enjoy the three guarantees. From the day of your purchasing, if there is any quality problem, you can have the following warranty services: 1. From the purchasing day, after 3years or 100,000 kilometers, we will provide free services for you after confirmation. 2. We provide lifetime warranty, but we will charge an appropriate fee. 3. The following cases are not included in the three guarantees.
Guangzhou OHC Electronic Science and Technology Co., Ltd Add: Longshan Industrial D, 260 Yinglong Road, Tianhe District, Guangzhou Website: www.ohcmotors.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
