Instructions / Assembly

ManualsBrandsOhio Steel ManualsTools & HardwareTractor Lift for Zero Turn Mowers

TRACTOR

LIFT

PROFESSIONAL GRADE

WARNINGS

• Always use the stabilizer bar provided when using tractor lift.

• Make sure stabilizer bar is properly in place before starting any work on

tractor.

• Read and understand all safety and operating instructions before using

the tractor lift. Never allow anyone unfamiliar with these instructions to

use the tractor lift.

• Read and understand all safety and operating instructions provided by

the tractor's manufacturer before using tractor lift.

• Never lay under the tractor or mowing deck.

• When using lift, keep all bystanders, including children, away.

• This tractor lift must be only used for lifting and lowering to and from a

level and stable surface.

• Never use in wet conditions.

• Do not attempt to lift the front and back of the tractor at the same time.

• Do not use tractor lift as an automotive lift, or for any other use for which

it is not intended or designed.

• If tractor lift is bowing while lifting or lowering your tractor, which

indicates an overload condition, remove the tractor immediately.

• Do not attempt to lift or lower any power equipment while motor is

running.

• Never engage blades while using tractor lift.

• Always disconnect spark plug wire from tractor before beginning any

work on tractor.

• Do not exceed the rated capacity of the tractor lift - 275 lbs.

• Failure to follow these warnings may result in property damage and/or

serious bodily injury.

SAFETY INSTRUCTIONS

• Be sure to read and follow all safety instructions and warnings. Failure to

follow these instructions may result in damage to the product and/or

serious personal injury.

• Danger of serious personal injury exists. Serious personal injury can

occur when using a lifting device.

• Never attempt to ride any vehicle up or down the tractor lift.

• Do not climb onto tractor while tractor is in the elevated position.

• When working on the front of the tractor always place wheel chocks in

back of the rear wheels/tires.

• Always raise and lower tractor lift in a controlled fashion; do not allow

the tractor to drop too quickly, damage could occur.

• Make sure lifting arms are aligned and set to the proper distance apart

so that the equipment being loaded is well balanced on the lift.

• Do not remove warning decals from product.

• Before each use, always check for any worn, loose, or damaged parts on

the tractor lift. If any damage is present, DO NOT USE THE TRACTOR LIFT.

• Periodically check the fasteners to make sure they are still tight and in

place.

• Keep lift surface clean by occasionally cleaning with water and any mild

detergent.

• Do not add to or try to modify the tractor lift in any way. Any modifica-

tions will void any warranties.

• Failure to abide by the warnings and read the safety instructions may

result in loss of load, damage to lift and/or property, serious personal

and/or fatal injury.

L4500

Easily change belts, blades

and service front tires

If there are any missing parts, or if you have any

questions on assembly, operation, maintenance or

safety, please call 800-652-2321

Tools required for assembly:

1. 9/16” wrench and/or socket

2. Adjustable wrench

3. Pliers

Tractor Lift can be used out of the box on most Zero-Turn

brands available through major retailers.

Maintenance

Store in a clean dry place.

Recommended tire pressure - 30 PSI.

Before each use:

Always check tire pressure.

Always inspect unit for damage.

Always check fasteners for tightness.

*Patent Pending

Made in China

6000161-REV B 4/09

Summary of content (8 pages)

PAGE 1
PROFESSIONAL GRADE TRACTOR L I F T TL 4 5 0 0 Easily change belts, blades and service front tires Tractor Lift can be used out of the box on most Zero-Turn brands available through major retailers. Maintenance Store in a clean dry place. Recommended tire pressure - 30 PSI. Before each use: Always check tire pressure. Always inspect unit for damage. Always check fasteners for tightness. Tools required for assembly: 1. 9/16” wrench and/or socket 2. Adjustable wrench 3.
PAGE 2
11 3 8 2 1 5 10A 4 TOOLS REQUIRED FOR ASSEMBLY MAINTENANCE 9/16" Wrench and/or Socket Adjustable wrench Pliers Store unit in a clean dry place. Recommended tire pressure - 30 PSI. Before each use: Always check tire pressure. Always inspect unit for damage. Always check fasteners for tightness.
PAGE 3
HARDWARE CONTENTS 22 25 23 40 24 30 HARDWARE CONTENTS Page 3 39
PAGE 4
Assemble Tractor Lift Attach Lift Tubes to Angle Frame • Attach receiver tubes ( 4 ) to angle frame ( 1 ) using bolts ( 22 ), flat washers ( 24 ), split lock washers ( 23 ) and hex nuts ( 25 ). • Slide lift tubes (5) into receiver tubes (4) secure with ring grip pins (30). Note: Over-tightening receiver bolts ( 22 ) could cause damage to lift tubes ( 4 ).
PAGE 5
Assemble Tractor Lift Attach Handle to Angle Frame Step 1. Attach handle bottom ( 3 ) to angle frame ( 1 ) using hex bolt ( 22 ), flat washer ( 24 ), split lock washer ( 23 ) and hex nut (25 ). Step 2. Insert ring grip pin ( 30 ), plugs ( 38) and grips (37) as shown. Step 3. Insert handle top ( 2 ) into handle bottom ( 3 ). Secure with hex bolts ( 40 ), and split lock washers ( 23 ). Step 4. Slide stabilizer bar (8) onto Foot Bar Tube.
PAGE 6
Using the Tractor Lift • Center Tractor Lift in front of tractor. • • Align lift tube claws with mowing deck and roll Tractor Lift forward to engage. • Check that claws are securely hooked under the mowing deck. • Place foot onto foot bar and apply continuous forward pressure with foot while pulling down on tractor lift handle. • Once lifted, the weight of the tractor will automatically force the handle down into the correct position. Page 6.
PAGE 7
OPERATION Using the Tractor Lift Step 3. Engaging Stabilizer Bar Stabilizer bar MUST be engaged immediately after raising the tractor. WARNING: Failure to engage stabilizer bar may result in serious personal injury and or property damage. • Remove securing wingnut ( 39 ) from tube handle. Slide stabilizer bar ( 8 ) from foot bar tube. • Turn stabilizer bar 180 degrees as shown at bottom of Figure 1. • Position stabilizer bar under base of unit between wheels.
PAGE 8
2 Service Parts List 37 24 39 25 8 22 11 23 23 3 10A 40 38 1 25 30 22 20 30 20 23 24 30 22 24 23 5 9 4 Page 8 25 21