User Manual
Charging blueMotion
®
Simply plug the USB charging cable provided with
blueMotion
®
into the USB port on your computer or USB
wall charger adapter. Connect the other end of the cable
into the charging socket on the end of blueMotion
®
(see
diagram). The LED on blueMotion
®
will blink indicating
the massager is charging. Please be sure that the
massager is completely dry before charging.
LED will glow steady (
) when fully charged.
NOTE: The USB port is for charging use only, no data transmission
functionality. When product is charging, the product will not be able
to vibrate until the USB cable is removed from charging socket.
Bluetooth
®
is also unavailable while charging.
Troubleshooting
If the LED does not blink when the product is connected to the USB cable,
check to make sure the USB cable is properly connected to the USB port and
blueMotion
®
.
Battery Disposal
• blueMotion
®
contains a rechargeable battery. Please do not dispose of this
product with normal household waste.
• Please dispose of this product at the appropriate electrical and electronic
equipment recycling disposal locations in accordance with government
regulations.
• The recycling of this product appropriately will help to protect our environment
≈ 2.5 HRS TO REACH FULL CHARGE
Additional Charging Safeguards
• Please be sure that the massager is completely dry before charging.
• Only use the charging cable provided to charge the devices.
• Do not use USB charging hubs to charge the devices.
• Only use with UL certied USB wall chargers.
NOTICE