Datasheet

1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax [phone] • www.ohmite.com • [e-mail]
140
DIMENSIONS
500 Series
Non-inductive Bulk Ceramic Slab Resistors
Length (L ± 1/16")
[L ± 1.6mm]
(L - 3/8") ±1/16"
[(L - 9.5mm) ±1.6mm]
1/4'' [6.4mm] Nom. Hole Spacing
20 Gage Steel Riveted
Tab, Tin-Plated
0.030'' [0.8mm] Typical
0.22'' [5.6mm]
Dia. Hole
Length (L ± 1/16")
[L ± 1.6mm]
(L - 3/8") ±1/16"
[(L - 9.5mm) ±1.6mm]
1/4'' [6.4mm] Nom.Hole Spacing
1.5" Max.
[38.1mm]
5/16"
[7.9mm]
Typical
20 Gage Steel
Riveted Tab,Tin-Plated
20 Gage Steel,
Tin-Plated
0.030'' [0.8mm] Typical
0.22'' [5.6mm]
Dia. Hole
0.35''
[8.9mm]
0.19''
[4.8mm]
5/16"
[7.9mm]
Typical
0.35'' x2
[8.9mm]
0.19''
[4.8mm]
3/8'' [9.5mm]
3/4"
[19.1mm]
3/4"
[19.1mm]
3/8" [9.5mm]
3/8"
[9.5mm]
1/4"
[6.4mm]
5/8" [15.9mm]
3/4" [19.1mm]
3/4" [19.1mm]
5/16" [7.9mm]
3/8" [9.5mm]
Hole Spacing (L + 3/4") ±1/16''
[(L + 19.1mm) ±1.6mm]
Hole Spacing (L +7/8") ±1/16''
[(L + 22.2mm) ±1.6mm]
Round Hole
0.275” Dia [7.0mm]
Slotted Hole
7/32 x 5/16"
[5.6 x 7.9mm]
Length (L ±1/16")
[L ±1.6mm]
20 Gage Steel
Riveted Tab, Tin-Plated
1" [25.4mm]
3/8" [9.5mm]
0.030''
[0.8mm]
Typical
13/16"
[20.6mm]
0.22" [5.6mm]
Dia. Hole
Hole Spacing
(L-3/8'') ±1/16''
[(L - 9.5mm) ±1.6mm]
Length (L ± 1/16")
[L ± 1.6mm]
Both Ends Aluminum
1/4" [6.4mm]
Length (L ± 1/16")
[L ± 1.6mm]
3/8" [9.5mm]
1/4"
[6.4mm]
20 Gage Steel, Tin-Plated
Length (L ± 1/16")
[L ± 1.6mm]
0.19''
[4.8mm]
With Right Angle Radial Tabs – same direction – (G2)
With Low Profile Axial Tabs (H1)
Without Tabs
Fig. 1 Fig. 2
Fig. 4Fig. 3
Fig. 5 Fig. 6
With Straight Radial Tabs (G1)
With Right Angle Radial Tabs – opposite direction – (G3)
With Standoff Axial Tabs (H2)
1.5" Max.
[38.1mm]
rev 1/19-2
HOW TO ORDER
504SP101KD G1
Tolerance
J = ±5%
K = ±10%
L = ±20%
Terminal Options
blank = Standard aluminum metalized ends, no tabs, per Fig. 1
G1 = Straight radial tabs per Fig 2
G2 = Right angle radial tabs, same direction per Fig 3
G3 = Right angle radial tab, opposite direction, per Fig 4
H1 = Low profile axial tabs, per Fig 5
H2 = Elevated axial tabs. per Fig 6
Tin plated steel radial tabs are standard.
Consult factory for other tab materials.
Construction
Type
Resistance (Ω)
For ≥10Ω: First 2 digits
are significant, third is
number of zeros to
follow, e.g. 101 = 100Ω
For <10Ω: R replaces
decimal point, e.g. R50
= 0.50Ω, 7R5 = 7.5Ω
Coating Options
D = Dielectric
O = Oil resistant