User's Manual

B526A Manual
Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, KOREA Page 5/ 9
TEL : [phone] / FAX : [phone]
http://www.ohsungec.com/
3 - Software Requirements
3.1 - Bluetooth 4.2 LE identification
a) Device Name: Channel Master Remote
b) Vender ID: 0x02AF
c) Product ID: 0x2025
d) Software Version : V0007
3.2 - Pairing mode
a) At first time pairing or after Factory Reset, RCU works only in IR.
b) Press [OK] and [APPS] keys for longer than 4 seconds. LED stays ON while pressing
[OK] and [APPS] keys.
c) After 4 seconds, the LED starts blinking so that to confirm the remote has entered into
pairing mode.
d) After RCU has entered pairing mode, RCU can send the IR signal of Up, Down, Left,
Right and OK keys.
e) If pairing is successfully made, the LED goes OFF and remote starts working in
Bluetooth.
f) If the user presses any key during pairing mode, the remote stops pairing and goes back
to IR mode, excepted Up, Down, Left, Right and OK keys.
g) If pairing is not successfully made for 90 seconds, the LED goes ON for 4 seconds and
then goes OFF. The remote stops pairing and goes back to IR mode if first time pairing
and after Factory Reset.
3.3 - Re-pairing mode
a) Press [OK] and [APPS] keys for longer than 4 seconds. LED stays ON while pressing
[OK] and Google [APPS] keys.
b) After 4 seconds, the LED starts blinking so that to confirm the remote has entered into
pairing mode.
c) After RCU has entered pairing mode, RCU can send the IR signal of Up, Down, Left,
Right and OK keys.