User's Manual

The Automator

The Learning Method

The Automator can learn commands from your old

remote controls one at a time, via this simple process:

Line-up the Automator with your old remote con-

trol, head-to-head, one or two inches apart.

Press and hold the MAIN and ENT (Enter) buttons

at the same time for approximately three seconds.

The top of the display screen will show “SET UP”.

You are in SET UP mode now.

Note: You have 30 seconds to perform a step while you are in

SET UP mode. If you don’t press a buton within that time, the

Automator will time out and return to normal operation.

Press the LEARN button to select the Learning

method.

The top of the display screen will

change to “LEARN”.

Press the

LEARN

Button