User's Manual

The Automator

The bottom of the display flashes ”PUNCH TO”.

Press the device button for the device that doesn’t

have volume control commands yet (i.e. DVD).

This is the device you are going to PUNCH TO for

the volume and mute commands.

Note: If you wish to PUNCH to the MAIN device, press the

POWER OFF button at this time.

The bottom of the display will then flash “PUNCH

FROM”. Now you select the device that has the

volume commands you want. The bottom of the

display will flash “SAVED”.

Repeat steps one to three until all your devices

operate the volume perfectly. Press the MAIN but-

ton twice to return to normal operating mode and

test your Punch Through programming.

Note: The Punch Through feature is not limited to volume

and can also be applied to channel or other functions. If you

find yourself switching to a particular device frequently to use

a group of controls, consider using Punch Through for anoth-

er group, as listed here:

VOL - Volume Up, Volume Down and Mute

CH - Channel Up, Channel Down and Prev. Channel

PLAY - Play, Stop, Pause, Rewind and Fast Forward

VOD - Guide, Menu, Info, Exit, Up, Down, Left, Right, Select

POWER - Power On and Power Off

Select

the Device

you want to

“Punch To”