User's Manual

URC-200

Press the button you want to set as a Macro

button. The top of the screen will display the label

of the button you selected. At the bottom of the

screen it displays “STEP0”, indicating that no

macro steps are set up yet.

Now you navigate to the Device and Page that

has a button you want in your macro using the

MAIN, DEVICE and PAGE buttons. When you

press a button, you set another Macro step. The

display at the bottom will flash the total number of

steps you have set up in this macro button.

Don’t worry about the number of steps. Each

macro button can store up to 190 steps, so you

are not likely to run out of steps!

Note: You can program delays in between commands by

pressing the PAUSE button. Each press adds half a second to

the delay.

Press the LIGHT button to end your macro. A new

screen appears:

If you are happy with your macro, press the SAVE

button. If not, the UNDO button lets you erase the

last step. The EXIT button erases all the macro

steps.

Press the MAIN button twice to return to

normal operation.

SAVE

Button