User's Manual

URC-200

If you pressed the ALL display button, the Automator

display screen will ask you if you are sure.

If you pressed the DEVICE display button, a list of

Devices will appear. Press the device button that

you wish to erase. The bottom of the screen will

flash ERASE twice, then ERASED.

If you pressed the KEY display button, you’ll have

to navigate to the Device and Page you want

using the MAIN, DEVICE and PAGE buttons. Press

a button to erase it. The bottom of the screen will

flash ERASE twice, then ERASED.

To return to normal operating mode, press the

MAIN button four times.

Erasing the Entire Automator

To erase EVERYTHING, press and hold both the MAIN

and the STOP buttons for 15 seconds. After 15 seconds,

the RESET screen appears. If you press the SURE button,

the Automator will reset itself to the factory default con-

figuration, erasing all of your work!

If you wish

to erase all,

press the

SURE button.

Press the

SURE button

to reset the

Automator to

factory

default

condition.