1. Introduction C3 2. Batteries on 3 A. Battery Installation B. Battery Life 3. Summary of Operations § A. Description of Devices B. Reprogrammed Codes C. Learning From Other Remote Controls D. Macro Operations E. Favorite Channel Buttons F. Punch Through Operations G. Editing LCD Text H. Cloning The MX-600™ 1. All Other Operations J. LCD Screen And Button Layout K. System Settings 4. Programming the MX-600™ to Control Your Components . = wens J A. Using Reprogrammed Codes 1. Three-Digit Code Number 2.
Congratulations! You have purchased une of the most sophisticated remote controls on the market. The has been designed to provide a new standard in remote control technology offering a very powerful and flexible reprogrammed and learning product. Setting up your M-6007 to operate your components is easy. Please follow the instructions in the manual and retain the manual for future reference. If any words used are unfamiliar to you, please refer to page 46 for a Glossary of terms nosed it this manual.
A. Battery Installation Before the remote control can be used, the batteries need to be installed. First, remove the battery cover on the back of the unit and install the four AAA batteries inside the battery compartment as shown. Make sure the batteries line up with the and markings. Improper installation could damage the remote control. When you're done, slide the battery cover back on. The remote control starts up automatically and the default devices will appear on the LCD screen. B.
C. Learning From Other Remote Controls The MX-600™ can learn codes from your original remote controls. There are 26 LCD screens in the MX-600™, Bach screen (page) has ten function buttons, including the ten device buttons on the main menu screen that can be taught. in addition, there are 31 buttons and a joystick (thumb pad) that can be taught for each of the ten devices. You can teach up to 530 new functions into the remote control. Please refer to page 19 in this instruction manual for details. D.
MUTE) while all the other buttons control other equipment. You can also set up the remote to operate channel control and transport functions (PLAY, STOP, REWIND, FAST FORWARD, SKIP-, SKIP+, PAUSE and RECORD buttons} from VCR, DVD, LD, CD or any other mode while all other buttons in the remote control are controlling other components. Please refer to page 32 in the manual for details. G.
K. System Settings AH programming is done by first entering the SETUP mode in the remote control. Press both the [find 4 FER buttons simultaneously for three seconds to enter the SETUP mode. SETUP will be shown at the top of the LCD screen. Fin HE = You exit the SETUP mode by simply pressing the [AIR bunion.
sound, you may want to start by setting up the DVD Device using the reprogrammed method described below, and then add functions from the other devices you will be using while watching your DVD video to the DVD device, For example, while playing a DVD, you will want to adjust the volume of your receiver. Sa, you would use the “Punch Through” method described on page 32 to put the Receiver's Volume control into your DVD Device.
first three-digit code number you selected for your device. There is no way of knowing which code is the one that will have the functions that more closely match your device than the others, so it is wise to try them all. See step #9 below. (Please enter the code number within 20 seconds of beginning programming, otherwise the remote will revert to the SETUP menu, and then after a period of time, it will go back to the MAIN device page.
4. The remote will be flashing “SELECT BUTTON". Press the device you wish to program. (For example, to program TV, press the TV button.) 5. The remote will be flashing “FROM TABLE”. Select the device from which the scanned code will be selected. (Important: If you have already relabeled your device keys, your LCD screen will not look like the illustration above. Select the appropriate LCD button for the “FROM TAB aching the labels as shown in the illustration on page 11 of this manual.
FETE DEN KEN WOOD 52 O13 som EE ER MANTRA at oss Rubies ET EES He ARE satin PANASONIC.