User's Manual

OCS SMART _ USER MANUAL _ VERSION 1.00 OJMAR 34
 If automatic closing is active, the lock will close automatically.
 If automatic closing is not active, enter the assigned code and press .
4.4 LOCK CONFIGURATION
The lock can be configured using the keypad or the OCS Smart app (see Section 3.4).
The lock factory settings are as follows:
Free mode
 Master code 000000.
 4 digits.
 LED active when closed (every 2 seconds).
 Buzzer active.
 Keypad lock not active.
 No rental time limit.
 WARNING: The lock must be in the open position to make any changes to its
settings.
4.4.1 CHANGE MASTER CODE
 WARNING: Change the default master code for your security.
The sequence to change the master code is as follows:
“START” + MASTER CODE + NEW MASTER CODE + 77 + LOCK