User's Manual

2_OCS LOCK OJMAR 35
4.4.2 MODE CHANGE (FREE/FIXED)
Fixed mode
In this mode the user must enter the same code each time they want to open or close the
lock.
The sequence to change from fixed mode to free mode is as follows:
“START” + MASTER CODE + 00 + LOCK
By default the user code will be 0000.
The sequence to change to free mode using the keypad is as follows:
“START” + MASTER CODE + 01 + LOCK
The sequence to change the user code is as follows:
“START” + MASTER CODE + NEW USER CODE + LOCK
 NOTE: The code can be changed with the lock closed or open.
Free mode
In this mode the user can enter any code to close the lock.
The sequence to change to free mode is as follows:
“START” + MASTER CODE + 11 + LOCK
4.4.3 CONFIGURE LED FLASHING WHEN CLOSED
The LED flashing when closed indicates that the locker is occupied.
The sequence to deactivate the LED when closed is as follows:
“START” + MASTER CODE + 95 + LOCK
The sequence to activate the LED when closed is as follows:
“START” + MASTER CODE + 85 + LOCK
4.4.4 CONFIGURE BUZZER
The lock buzzes each time a key is pressed.
The sequence to deactivate the buzzer is as follows:
“START” + MASTER CODE + 25 + LOCK
The sequence to activate the buzzer is as follows:
“START” + MASTER CODE + 15 + LOCK