User's Manual

2_PORTABLE PROGRAMMER OJMAR 31
2. PORTABLE PROGRAMMER
2.1 GENERAL DESCRIPTION
The portable programmers allow for the keys supplied by Ojmar to be read and
recorded.
We have two programmers, each with different features. Both models are connected
to the PC via a USB port. The features are indicated below:
2.2 OJMAR NFC MODEL PROGRAMMER
The Ojmar NFC programmer can function autonomously or using the OTS
Management Software (See Section 4). When functioning autonomously, it can
record free keys (See Section 1.5.2) and when functioning using the Management
Software it can:
 Read information from keys.
 Write set-up, user, cancellation and maintenance keys.
 Test locks.
 Read events from locks.
 Initialise locks previously configured using the Software.
 Update the lock Firmware.
 NOTE: Whenever an operation is performed between the NFC programmer and
the lock, the programmer updates the time of the lock.