User's Manual

OJMAR 82
 NOTE: The set-up keys must be created for consecutive lock groups. See the
example below.
 EXAMPLE: There are several free locks to be initialised: from 1 to 10 and from 40
to 50. In this case, two set-up keys must be created. One for the 1 to 10 group and
another key for the 40 to 50 group.
3. Lock time setting: Creates a key with the time and date defined on the PC at
that time.
 NOTE: Use it on all locks, remembering that for every block of 15 locks, another
minute is added to the next block
4. Operations: This allows for the contents of the key to be read or for the values
entered in Points (2) and (3) to be recorded.
4.12 RECORD USER KEYS
Access this screen via the “Keys / User keys" menu or by clicking on the following
button on the main screen:
The main user keys screen displays the following information: